Advanced Screen; Cpu Configuration - ASROCK A770DE User Manual

3 . 4 3 . 4 3 . 4

Advanced Screen

Advanced Screen Advanced Screen
3 . 4 3 . 4 Advanced Screen Advanced Screen
In this section, you may set the configurations for the following items: CPU
Configuration, Memory Configuration, Chipset Configuration, ACPI Configuration, IDE
Configuration, PCIPnP Configuration, Floppy Configuration, SuperIO Configuration,
and USB Configuration.
Advanced
Main Smart
Advanced Settings
WARNING : Setting wrong values in below sections
may cause system to malfunction.

CPU Configuration

Memory Configuration
Chipset Configuration
ACPI Configuration
IDE Configuration
PCIPnP Configuration
Floppy Configuration
SuperIO Configuration
USB Configuration
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Setting wrong values in this section may cause
the system to malfunction.
3 . 4 . 1 3 . 4 . 1 CPU Configuration CPU Configuration
3 . 4 . 1 3 . 4 . 1 CPU Configuration 3 . 4 . 1 CPU Configuration CPU Configuration
Advanced
CPU Configuration
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Spread Spectrum
Boot Failure Guard
Cool' n' Quiet
Secure Virtual Machine
Enhanced Halt State
L3 Cache Allocation
Advanced Clock Calibration
Processor Maximum Frequency
North Bridge Maximum Frequency
Processor Maximum Voltage
Multiplier/Voltage Change
HT Bus Speed
HT Bus Width
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
AM2 Boost
This option appears only when you adopt AM2 CPU. If you set this option to
[Enabled], you will enable ASRock AM2 Boost function, which will improve the
memory performance. The default value is [Disabled]. Please refer to cau-
tion 12 on page 9 for details.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Options for CPU
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Select the over clock
mode.
[Auto]
[200]
[100]
[Auto]
[Enabled]
[Auto]
[Enabled]
[Disabled]
[Auto]
[Disabled]
Select Screen Select Screen
x10.5 2100 MHZ
Select Item Select Item
x9.0 18 00 MHz
+- +- Change Option Change Option
1.2500 V
F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
[Auto]
[Auto]
ESC ESC Exit Exit
4 0 4 0 4 0 4 0 4 0
Exit