Without Raid Functions; Installing Windows Xp / Xp 64-Bit Without Raid; Tm Tm; Functions - ASROCK A770DE User Manual

NOTE1. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
NOTE2. Currently, if you install Windows
and there are no SATA / SATAII device used, please set up "SATA Operation Mode"
to [IDE] in BIOS.
2 . 1 6 2 . 1 6 Installing Windows Installing Windows
2 . 1 6 2 . 1 6 Installing Windows 2 . 1 6 Installing Windows Installing Windows
Vista Vista Vista Vista Vista 64-bit W 64-bit W 64-bit W 64-bit W 64-bit Without RAID F
TM TM TM
TM TM
If you want to install Windows
Vista 64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow
TM
below procedures according to the OS you install.
2.16.1 Installing Windows 2.16.1 Installing Windows 2.16.1 Installing Windows 2.16.1 Installing Windows 2.16.1 Installing Windows
F F F F Functions unctions unctions
unctions unctions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Make a SATA / SATAII driver diskette.
Make a SATA / SATAII driver diskette by following section 2.15.1 step 2 on page
33.
STEP 3: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [AHCI].
STEP 4: Install Windows
You can start to install Windows
beginning of Windows setup, press F6 to install a third-party AHCI driver. When
®
prompted, insert the SATA / SATAII driver diskette containing the AMD AHCI driver.
After reading the floppy disk, the driver will be presented. Select the driver to install
according to the OS you install. (Select "AMD AHCI Compatible RAID Controller-x86
platform" for Windows XP, or "AMD AHCI Compatible RAID Controller-x64 platform"
®
for Windows XP 64-bit.)
®
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
Vista / Windows Vista
® TM ® TM
Vista / Windows
® TM
XP / XP 64-bit / Vista XP / XP 64-bit / Vista
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
ithout RAID F ithout RAID F ithout RAID F ithout RAID Functions unctions unctions unctions unctions
XP, Windows XP 64-bit, Windows
® ®
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ®
XP or Windows XP 64-bit on your SATA / SATAII HDDs
® ®
Advanced screen
Advanced screen
® XP / Windows ® XP 64-bit OS on your system.
XP / Windows XP 64-bit OS on your system. At the
® ®
3 5 3 5 3 5 3 5 3 5
64-bit on IDE HDDs and want to
Vista 64-bit on IDE HDDs
® TM
/ / / / /
TM TM TM TM TM
Vista or Windows
® TM
IDE Configuration.
IDE Configuration.
®