Tape Playback - Aiwa CT-FX719 Operating Instructions Manual

Press the following buttons to operate tape
TAPE PLAYBACK
3 1
DIR
1
1
2
3
Press OPEN to open the front panel
and insert a cassette.
Playback starts in the direction that the unit
played back previously.
A (eject) button
Close the front panel,
Tape running indicator
Adjust the volume with +/-.
Notes
If a cassette is already inserted, press DIR to
start playback.
Be sure to close the front panel after inserting or
ejecting a cassette.
transporl.
To do this
Eject the cassette
Change the playback
side
Stop fast-forwarding or
rewinding and resume
playback
Fast-forward either side
of the tape
Rewind either side of
the tape
Stop the tape and turn
the unit off
Press this button
@
(for more than
2 seconds)
At the end of the tape in Fast Forward mode, the
other side of the cassette will start playing
automatically.
At the end of the tape in Rewind mode, the same
side will start playing automatically.
Direction indications
=
F~J] Displayed when the upper side of the
p~i' Displayed when the lower side of the
Tape transport display
When you start tape playback, the transport
display indicates the tape movement.
Upper side: During playback,
fast-fowarding
Lower side: During rewindina
Lower side: During playback,
fast-fowarding
Upper side: During rewinding
During fast-forwarding or rewinding, the transport
display accelerates.
Before turning the ignition off
Be sure to eject any cassette from the unit before
turning the ignition off.
mm
ENGLISH
10