Setting The Clock; Radio Operation - Aiwa CT-FX719 Operating Instructions Manual

SETTING THE CLOCK
RADIO OPERATION
4 1,2
1,3
DISP 2
You can turn the unit on by pressing any button
except OPEN on the front panel.
I With the unit on, press and hold SELfor
more than 2 seconds until the clock
indication appears.
1
2
2 Press TUNE v to set the hour.
Press TUNE A to set the minute.
3 Press SEL to start working the clock
from O second.
Havingthe clockdisplayedwhile in Radio,Tape
Playor CDChangerPlaymode
Press DISP repeatedly until the clock is displayed.
The clock display appearsfor5 seconds, then the
unit returns to its former display.
Each time you press DISP, the display changes
as follows,
T
Radio~ape Play/CD Changer Play indication
J
Clock
3
4
3
Press BAND to turn the radio on.
The radio frequency appears.
Press BAND again to select the band
from among FI (FM1), F2 (FM2), F3
(FM3), Al (AM1) and A2 (AM2).
The band indications appear cyclically in
order.
F1, F2 and F3 share the same frequency
range.
Al and A2 share the same frequency range.
Band indication Frequency (ndication
Press (more than 2
seconds) either
TUNE 7 orTUNE Atotuneinthedesired
station.
The unit starts scanning and tunes in a station
automatically (seek tuning).
Press TUNE Y to decrease and TUNE A to
increase the frequency.
Press the button again to cancel seek tuning.
Repeat the procedure until the desired station
is tuned in.
Note
If you press (less than 0.5 second at a time)
either TUNE Y or TUNE
A,
the frequency
decreases or increases step by step.
Adjust the volume with +/-.
5
ENGLISH