Tape Playback - Aiwa CT-FX531M Operating Instructions Manual

Using the timer
(My Information)
You can schedule the radio to activate for daily radio
programs. The unit automatically turns on and off in
Radio mode at the scheduled times.
Smart Jog
1
Turn off the unit.
2
Press and hold INFO until "PROGRAM" flashes in
the display.
3
Press the preset station button 1 (for PROGRAM 1)
or 2 (for PROGRAM 2) to select the desired timer.
4
Press SEL twice.
5
Set the time you wish the unit to turn on.
• Press TUNEi and turn the Smart Jog to set the
hour.
• Press TUNEk and turn the Smart Jog to set the
minute.
6
Press SEL twice.
7
Press FNC to select the band.
8
Press TUNEi, TUNEk or the desired preset station
button to select the station.
9
Press SEL twice.
10
Set the time you wish the unit to turn off following the
same procedure used in step 5.
11
Press SEL.
12
Press INFO.
The unit turns off, and setting is completed.
• When you set the other timer, repeat all the steps.
In such a case, be sure to select the other one in
step 3.
• To cancel a timer setting in progress, press and
hold PWR/MUTE to turn off the unit.
When the unit is on, "MY INFO" appears in the
display indicating that the unit is standby for a timer.
During the timer-activated tuning, "MY INFO"
continues to flash.
To cancel the timer standby
1 Press INFO repeatedly to select the desired timer
(PRG 1 or PRG 2).
2 Press TUNEi or TUNEk to select OFF.
3 Press INFO again.
5 5
ENGLISH ENGLISH
MY INFO indicator
Notes
• When you preset two programs, be sure that they do
not overlap.
• The unit automatically starts tuning at the scheduled
time regardless of the current source mode. When the
scheduled program is over, the unit automatically
returns to the former source mode.
• When this function is activated, TUNE i/k, PS/A.ME,
LO, INFO, and the preset station buttons do not work
for tuning in stations.
• The timer setting remains in effect when you turn off the
unit, and even if you detach the front panel from the
unit.
• However, if you press FNC to change the source mode
during timer-activated tuning, the scheduled program
is canceled.

TAPE PLAYBACK

Playing a tape
1
Insert a cassette to start playback.
If a cassette is already inserted, press FNC repeatedly
to select Tape Play mode to start playback.
Playback starts in the direction that the unit played
back previously.