Table of Contents
Advertisement
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port: Use this to set addresses for the onboard serial ports or
disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /
COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
OnBoard Infrared Port: You may select [Auto] or [Disabled] for this onboard
infrared port feature.
OnBoard Parallel Port: Select Parallel Port address or disable Parallel Port.
Configuration options: [Auto], [Disabled], [378], [278].
Parallel Port Mode: Set the operation mode of the parallel port. The
default value is [ECP+EPP]. If this option is set to [ECP+EPP], it will
show the EPP version in the following item, "EPP Version".
EPP Version: Use this item to set the EPP version. Configuration options:
[1.9] and [1.7].
Parallel Port IRQ: Use this item to set the IRQ for the parallel port. Configu
ration options: [IRQ5] and [IRQ7].
Parallel Port DMA Channel: Use this item to set the ECP mode DMA
channel.
OnBoard Midi Port: Select address for Midi Port or disable Midi Port.
Configuration options: [Disabled], [330], [300], [310], [320].
Midi IRQ Select: Use this to select Midi IRQ. Configuration options:
[5], [10], [11].
OnBoard Game Port: Select address for Game Port or disable Game Port.
Configuration options: [Disabled], [200H], [208H], .
OnBoard IDE: You may enable either the primary IDE channel or the secondary
IDE channel. Or you may enable both the primary and the secondary IDE
channels by selecting [Both]. Set to [Disabled] will disable the both.
Configuration options: [Disabled], [Primary], [Secondary], [Both].
OnBoard LAN (Optional): This allows you to enable or disable the
"OnBoard LAN" feature.
OnBoard AC'97 Audio: Select [Disabled], [Auto] or [Enabled] for the onboard
AC'97 Audio feature.
OnBoard MC'97 Modem: Select [Auto] or [Disabled] for the onboard MC'97
Modem feature.
System Hardware Monitor: You can check the status of the hardware on your
system. It allows you to monitor the parameters for CPU temperature,
Motherboard temperature, CPU fan speed, and critical voltage.
Configuration options:
[DMA0], [DMA1], and [DMA3].
Advertisement
Table of Contents
