Easy Dual Monitor Feature; Jumpers Setup - ASROCK 775I45GV User Manual

2.7 Easy Dual Monitor Feature

Thanks to ASRock patented AGI8X Technology, this motherboard supports
Easy Dual Monitor upgrade. With the internal onboard VGA and the external
add-on AGP VGA card, you can easily enjoy the benefits of Dual Monitor
feature. For the detailed instruction, please refer to the document at the
following path in the Support CD:

2.8 Jumpers Setup

The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is "SHORT". If no jumper cap
is placed on pins, the jumper is "OPEN". The
illustration shows a 3-pin jumper whose pin1
and pin2 are "SHORT" when jumper cap is
placed on these 2 pins.
Jumper
PS2_USB_PWR1
(see p.9 item 1)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
JR1
(see p.9 item 20)
JL1
(see p.9 item 20)
Note: If the jumpers JL1 and JR1 are short, both the front panel and the rear panel
audio connectors can work.
CLRCMOS0
(see p.9 item 10)
Note: CLRCMOS0 allows you to clear the data in CMOS. The data in CMOS includes system
setup information such as system password, date, time, and system setup parameters. To
clear and reset the system parameters to default setup, please turn off the computer and
unplug the power cord, then use a jumper cap to short the pins on CLRCMOS0 for 3
seconds. Please remember to remove the jumper cap after clearing the CMOS.
..\ Easy Dual Monitor
Setting
1_2 2_3
+5VSB (standby) for PS/2 or
+5V +5VSB
JR1 JL1
2-pin jumper
Description
Short pin2, pin3 to enable
USB wake up events.