Omron V680 RFID Datasheet page 8

Amplifier: ID Flag Sensor
Model
Item
Rated voltage
Power consumption
Ambient operating temperature
Ambient storage temperature
Ambient operating humidity
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Appearance
Degree of protection
Materials
Weight
Mounting
Note 1. For details, refer to the User's Manual (Cat. No. Z278).
2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor Unit, mount it inside of a
control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable (sold separately).
I/O Specifications
Model
Item
Input specifications
Output specifications
I/O Circuit Diagrams
V680-HAM91
Input circuit
24 VDC
8.2 kΩ
Main
circuit
IN
Tr
0 V
V680-HAM42-DRT, V680-HAM91/-HAM81
8
24 VDC (−15% to +10%) including 10% ripple (p-p)
3.5 W (24 VDC, 150 mA max. except external I/O line current)
−10 to 55°C (with no icing)
−25 to 65°C (with no icing)
25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
20 MΩ min. (at 500 VDC) between all terminals excluding the FG terminal and the case
1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case
10 to 150 Hz, 0.2-mm double amplitude at 15 m/s
each
2
150 m/s in X, Y, and Z directions 3 times each (18 times in total)
90 × 30 × 65 mm (excluding protrusions)
IEC 60529, IP40
Polycarbonate (PC) resin, ABS resin
Approx. 130 g
DIN Track
V680-HAM91
Transistor output
Short-circuit current: 3 mA (TYP) (input terminal and 0-V terminal shorted)
OFF voltage: 15 to 30 VDC, ON voltage: 0 to 5 VDC
Input impedance: 8.2 kΩ
Applied voltage: 30 VDC max.
NPN open-collector output
30 VDC, 20 mA max
Residual voltage: 2 V max.
Output circuit
OUT
Main
circuit
0 V
V680-HAM91/V680-HAM81
2
acceleration with 10 sweeps in X, Y and Z directions for 8 minutes
PNP open-collector output
30 VDC, 20 mA max
Residual voltage: 2 V max.
V680-HAM81
Input circuit
24 VDC
Tr
IN
Main
circuit
8.2 kΩ
0 V
V680-HAM81
Output circuit
24 VDC
Main
OUT
circuit
0 V