Omron V680 RFID Datasheet page 3

V680 ID Flag Sensors
V680-HAM91/-HAM81
Easy Setup! The RFID System Can Be Used Just Like
a Sensor.
Read and Write 16 Bits of Data with 1 Unit.
Useful in Applications from Simple Product Identifi-
cation to Managing Work Progress
• Read or write 16 bits of data (for up to 64,000 IDs) with one Unit
despite its compact size.
• Read or write up to 128 bits by using the address shift function.
• With NPN and PNP outputs
• Equipped with a V600-HAM/HAR-compatible Access Mode, allowing
use of existing programs.
• Complies with international standards, including CE, UL/CSA, and
radio wave regulations.
Radio wave regulation compliance is applicable to Japan, Europe,
the U.S.A., and Canada. Radio wave regulation compliance for China
and South Korea is pending.
System Configuration
ID Tag
1-Kbyte memory
V680-D1KP52MT (8 dia. × 5 mm)
For embedding in metallic or
non-metallic surface
1-Kbyte memory
V680-D1KP66MT/V680-D1KP66T
(34 × 34 × 3.5 mm)
For flush mounting on metallic surface
1-Kbyte memory
V680-D1KP66T-SP
(96 × 36.5 × 6.5 mm)
For flush mounting on non-metallic
surface
2-Kbyte memory
V680-D2KF52M (8 dia. × 5 mm)
For embedding in metallic or
non-metallic surface
2-Kbyte memory
V680-D2KF67M/V680-D2KF67
(40 × 40 × 4.5 mm)
For flush mounting on non-metallic
surface
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
(86 × 54 × 10 mm)
For flush mounting on non-metallic
surface
Note 1. Attach an Antenna to the V680-HAM91/-HAM81 ID Flag Sensor to read and write V680 ID Tag data.
2. The DeviceNet ID Slave can communicate with ID Tags that comply with ISO/IEC 18000-3 (ISO/IEC 15693) in addition to V680-series ID Tags.
Communications with ID Tags other than V680-series ID Tags, however, may not be stable. Always check compatibility completely before using other
ID Tags.
3. Use a V680-HS51/-HS52 Antenna if the V680-D1KP52MT or V680-D2KF52M is to be embedded in metal. Communications cannot be
performed if a V680-HS63 Antenna is used in combination with the V680-D1KP52MT or V680-D2KF52M.
The V680-HS65 Antenna cannot communicate with V680-D1KP52MT or V680-D2KF52M ID Tags if they are embedded in metal.
Read/Write Antenna
Cylinder type
V680-HS52
-W: Standard cable,
waterproof connector
-R: Flexible cable,
non-waterproof connector
Cable length: 2 m or 12.5 m
Cylinder type
V680-HS51
Cable length: 2 m
Square type
V680-HS63
V680-HS65
-W: Standard cable,
waterproof connector
-R: Flexible cable,
non-waterproof connector
Cable length: 2 m or 12.5 m
V680-HAM42-DRT, V680-HAM91/-HAM81
Amplifier Interface Cable
V680-HAM91 V680-A60 (2 m)
(NPN output) V680-A60 (5 m)
V680-HAM81 V680-A60 (10 m)
(PNP output)
Connector pins:
26 pins
Host
Programmable
Controller
B7A-series Link
Terminal, I/O
Terminal, etc.
Sensor Controller
3