Omron V680 User Manual page 49

V680-HS65
100
90±0.2
Securely tighten screws to a torque of 0.7 to 1.2 N m.
Mounting Bracket Dimensions (Provided Only with the V680-HS65)
100 ±0.2
90±0.1
Use M4 screws and spring washers (in four places) for
Four, M4
Antenna installation.
mounting holes
Tighten the screws to a torque of 0.7 to 1.2 N m.
There are no restrictions on the mounting direction or
the direction of access to the Tag, but if the Antenna is to
be installed near a device such as a conveyance belt,
100
make sure there is no danger of the Antenna being
90±0.2
accidentally struck.
Note: When installing the Antenna, mount it on the
Four, 1-mm
enclosed Mounting Bracket. The Mounting
corners
Bracket is not necessary, however, if the Antenna
is mounted on a metal base that is larger than the
Antenna (100
100 ±0.2
90±0.1
Four, 4.5-dia. holes
100 mm).
Mounting base
V680-HS65
Mounting Bracket (provided)
Section 4
Installation
RFID System
47
User's Manual