Back Panel Connectors - CyberHome Cyber Home CH-DVD500 Owner's Manual

Back Panel Connectors

Connections on the Back Panel
The back panel is where you'll find all the physical connections for the DVD Player. You will only use one Video
and one Audio connection at any given time. For instance, if you're using the Composite Video jack to connect
to your TV, the S-Video and Component connectors will be unused.
Component Video Connectors
Y, Pr & Pb connectors for use with TVs
compatible with Component Video and/or
Progressive Scan Video.
Composite Video Connector
Typical connection. Connect Yellow
cable to TV Video In.
Stereo Analog Audio Outputs
Use White/Red Audio Cable to connect
to Audio In (L/R) of TV or Receiver.
Y
DIGITAL OUTPUT
Pb
VIDEO OPTICAL
OUT
Pr
S-VIDEO
OUT
VIDEO VIDEO VIDEO VIDEO
Optical Digital Audio Connector
Use special Optical Digital Audio Cable to
connect to Digital Receiver's Optical Input.
S-Video Connector
Use special S-Video Cable to
connect to TV's S-Video In jack.
Dolby/DTS 5.1 Channel Outputs
Connect to Dolby-Ready Receiver or
Speaker System.
DTS/DOLBY 5.1CH DIRECT OUTPUT
ANALOG OUTPUT
FRONT
COAXIAL
R
L
AUDIO AUDIO AUDIO AUDIO
CoAxial Digital Audio Connector
Use special CoAxial Digital Audio Cable to
connect to Digital Receiver's CoAxial Input.
Ventilation Grill
Allows hot air to flow from the unit. Make sure
not to block when positioning the player.
CAUTION
SURROUND SUB WOOFER
RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK
DO NOT OPEN DO NOT OPEN
R
L
CENTER
VIDEO VIDEO AUDIO AUDIO
AUDIO AUDIO
11
AC Power Inlet
Insert the power cord here first.
Then, plug other end to AC
Outlet (100-230V).
AC IN
100V-230V
50Hz/60Hz
CLASS 1 LASER
PRODUCT
AC Power Switch
Turns the main power OFF/ON. Must
be set to ON for unit to operate.
AC SWITCH
ON
I
O
OFF