System Settings; Pt Operations - Omron NS-RUNTIME - SOFTWARE 2007 User Manual

3-2 System Settings

3-2 System Settings

This section describes methods for setting the NS-Runtime Operating parameter.
Only Items different from NS Series system settings are explained here. For the setting items
common to the NS Series, please refer to the System Settings and Project Properties in the
CX-Designer Online Help.
Display System Setting Dialog Box in the following procedure.
1. Select PT Menu – System Setting.
2. System Setting Dialog Box will be displayed.
3-2-1

PT Operations

Select PT Tab.
No
1
2
3-4
Item
Screen Saver If the Screen Saver Active Field is set to Display Erased, the
monitor's power supply will be turned OFF if there are no
operations on the computer, including the NS-Runtime, for the
time set in the Screen Saver Start-up Time. Also, with the NS-
Runtime, the screen saver start-up time cannot be set indirectly.
Device Monitor, The NS-Runtime does not the support Device Monitor function.
Changing Value Therefore, no setting is required for the Changing Value.
1
2
Description