External Application; Cx-Programmer; Switchbox Utility - Omron NS-RUNTIME - SOFTWARE 2007 User Manual

5-5 External Application

5-5 External Application

This function is used to start up the CX-Programmer and the SwitchBox Utility.
This section describes methods for starting up external applications. For details on the
functions and operations of external applications, refer to the manuals for each application.

CX-Programmer

SwitchBox Utility

5-5-1 CX-Programmer
1. Click the Launch Button next to the CX-Programmer.
If the CX-Programmer has not installed, the following dialog box below will be displayed.
Install the CX-Programmer.
5-5-2 SwitchBox Utility
1. Click the Launch Button next to the SwitchBox Utility to launch the SwitchBox Utility.
If the SwitchBox Utility has not installed, the following dialog box below will be displayed.
Install the SwitchBox Utility.
5-12
Item
Starts up the CX-Programmer.
Starts up the SwitchBox Utility.
Function