Application Precautions - Omron NS-RUNTIME - SOFTWARE 2007 User Manual

Application Precautions

•
For information on device connections and settings for a computer where the NS-Runtime is
installed, also refer to NS-V1/V2 series Programmable Terminals Setup Manual V083-E1-@.
•
Use this product under Windows general specifications.
•
When unpacking the product, check the CD and the dongle carefully for any damages.
•
Do not install unnecessary applications in a computer where the NS-Runtime is installed.
•
Exit all applications that are not directly related to the NS-Runtime.
•
Disable sharing hard disks, printers or other devices with other computers on any network.
•
Some notebook computers set the RS-232C port to modem or infrared line by default. Change
the settings according to the operating instructions for your computer so that the RS-232C port
can be used as a normal serial port.
•
Some notebook computers set the RS-232C port not to supply rated power to the port to save
energy by default. There are Windows settings and also possibly settings for computer specific
utilities or BIOS settings for power saving. Disable the settings according to the operating
instructions for your computer to provide power to the port.
•
The whole systems may stop depending on the way the NS-Runtime started/ended. Follow the
procedure to start/end the NS-Runtime.
•
Start actual system application only after sufficiently checking screen data, macros, and the
operation of the program in the host.
•
Include programming that regularly accesses the RUN signal and confirms that the NS-Runtime
is operating normally.
•
Confirm the safety of the system before pressing touch switches.
•
Do not accidentally press touch switches when the backlight is not lit or when the display does
not appear.
•
Signals from the touch switches may not be input if the switches are pressed consecutively at
high speed. Confirm each input before proceeding to the next one.
•
Before initializing screen data, confirm that existing data is backed up at the CX-Designer.
•
When changing the password with the system menu, do not reset or turn OFF the power supply
until writing is finished (i.e., until the Write Button returns to its original condition). It may become
impossible to manipulate screens if the password is not set correctly.
•
Do not attempt to disassemble, repair, or modify the product in any way.
•
Dispose of the product according to local ordinances as they apply.
10