Omron MS4800E Operation Manual page 64

System Specification
46
Power Input Transmitter
MTS Input
Power Input Receiver
Leakage current
Capacitive Load
Inductive Load
Test pulse data
Muting Option
Muting Duration
Power Supply
Protection class
(IEC 536 or VDE 106)
Enclosure Rating
Operating Temperature
Storage Temperature
Relative Humidity
Vibration (IEC 60068-2-6)
Shock (IEC 60086-2-29)
Cable length
MS4800 Transmitter
Cable length
MS4800 Receiver
Cable length
MS4800FS system
Electrical
24 VDC ±20%, maximum current 285 mA
24 VDC ±20%, 20 mA typ.
24 VDC ±20%, maximum current 1835 mA
Receiver 485 mA + AUX 100 mA +
OSSD1 625 mA + OSSD2 625 mA
< 1mA
< 4.7µF for OSSD output
Please contact your Omron representative for further
information.
OSSD 1
OSSD 2
t
1
t
2
t1: Test pulse ≤ 600 µs
t2: 4 ms ≤ Test interval ≤ 40 ms
t3: Repetition ≤ 5 min
24 VDC ±20%, 30 mA max.
Approx. 2 min. or No time limit
Must meet the requirements of EN/IEC 60204-1 and
EN/IEC 61496-1, and must guarantee safe insulation
from the mains voltage in accordance with IEC 60742
and be able to cover a drop of supply voltage of at least
20 ms.
III
Environmental
IP65
-10°C ... +55°C
-25°C ... +70°C
95% maximum, non-condensing
10 - 55 Hz, 10g, maximum on all 3 axes
10g for 16 ms, 1000 shocks on all 3axes
Connections
Unshielded cables:
Max. 50 m, @ 0.32 mm²
We recommend to use the F39-JMT cables or as
alternative the F39-TGR-CVL-B-_E (shielded) to
connect the MS4800 system to the machine control
system.
Unshielded cables, length is depending on the maxi-
mum current consumption:
OSSD 1&2-load 625 mA: 12 m @ 0.5 mm²
OSSD 1&2-load 300 mA: 45 m @ 0.5 mm²
We recommend to use the F39-JMR cables or as
alternative the F39-TGR-CVL-B-_R (shielded) to
connect the MS4800 system to the machine control
system.
Shielded cables, M12 connector 4-pin, these cables are
available as accessories. Maximum length is 10 m
between segments
Section 15-1
t
t
3