Rope Pull Emergency Stop Switch
ER6022
• Long rope spans up to 80 m means fewer number
of switches required per application
• Tension indicator—the tension indicator makes the
system easy to set up and to maintain the proper
rope tension
• Contact arrangements of 2 N/C + 1 N/O or 3 N/C
• IP67 (NEMA 6) enclosure enables the ER6022
switch to withstand water washdown cleaning
• Heavy-duty housing—the die-cast housing and
stainless steel eye nut makes the ER6022 suitable
for demanding industrial applications
• Reset button—the blue reset button must be
pushed in order to return to "machine run" condition
following switch actuation by a pulled or slacked
rope
• Long life—the ER6022 switch is designed for a min-
imum of one million actuations
• Vibration tolerant—the snap-acting switch contacts
protect against nuisance tripping due to vibration
• Indicator beacon—the optional dual indicator bea-
con, available in 24 VDC, can be wired to flash red
to indicate a tripped switch or glow a constant green
to indicate a properly reset switch
• E-stop button—the ER6022 has two mounting posi-
tions where the optional E-stop button may be in-
stalled; the E-stop button may be added or replaced
in the field
Operation
Blue Reset Button
A blue reset button is provided to easily return
the unit back to its machine-run position after
actuation.
Installation Hardware Available
RK Rope Tension Kit
ER6022
The RK Rope Tension Kit comes
with all of the required hardware
for most installations. A spring is
required as shown in the installa-
tion example below.
Emergency Push Button
Installation Hardware
Thimble
For the Latest Information
On the Internet: www.omron-industrial.com or www.sti.com
The emergency push button may
be installed or repositioned in the
field. The ER6022 has two possi-
ble mounting positions for the
emergency stop button.
Individual hard-
Tension/Gripper
ware items may
be purchased for
specific installa-
Spring
tion requirements.
Turnbuckle
Double Loop Clip
Eyebolt
Rope Pulley
1