Omron CX-SUPERVISOR - V2.0 User Manual page 328

Table of Contents

Advertisement

OMRON
APPENDIX D
CX-Server Error Codes
When errors occur in the communication package, CX-Server, an error code may be displayed in the
CX-Supervisor Error Log. To explain the cause of this error:
In the CX-Supervisor Error log, press the "Display Code Converter" toolbar
button to launch the Error converter and show further details. See Chapter 6
Projects, Events / Error messages for more details.
Or launch the Error Code converter from the Start menu, under the CX-
Supervisor menu and type in the code displayed.
Alternatively, the full list of causes is below. Note that the cause is only the last 2 digits of the error
code for example, if the error shown is "0x8a1b" then ignore the "8a" and just look up "0xnn1b":
Code
Cause
0xnn00
Normal Operation.
0xnn01
Cancel Button was pressed.
0xnn02
Normal Operation.
0xnn03
The executing function was stopped in the applications callback handler.
0xnn04
The return specified buffer is not large enough to hold all the data requested.
0xnn05
The specified name is not unique within the open project file.
0xnn06
An unspecified error occurred in CX-Server that is not handled by any other error code.
0xnn07
CX-Server has not been initialised by the application.
0xnn08
The specified address is invalid for the selected or open device. This error may be
generated by the Communications Manager during address validation, or the device
during a read / write request.
0xnn09
The CDMPLCCommand function executed is not supported on the selected or open
device.
0xnn0A
The File or filename specified is invalid or could be opened / created.
0xnn0B
The device's operating mode is invalid for the requested operation, or the device was
opened in an mode not compatible with the requested operation e.g attempt to execute
CDMGetData when the device was open in Read Only mode.
0xnn0C
The specified name is invalid, it name contains invalid characters.
0xnn0D
One or more of the specified parameters are invalid.
Release 2.0
APPENDIX D – CX-Server Error Codes
Page 305

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx-supervisor 2.0

Table of Contents