Table of Contents
Advertisement
CHAPTER 9 – Animation
Scripts can be generated either by typing directly into the script code text field or by using the pull
down menu commands. When using the pull down menu commands the user is assisted in the
completion of the parameters to the command via a series of dialogs. The dialogs displayed vary
according to the type of command being entered.
Points
A point may be inserted into the script code in a number of ways:
♦
Clicking the Browse pushbutton, picking the point off the list and clicking the OK pushbutton.
♦
Typing the name of the point
System points form part of the points list.
Undo Last Action
The last edit performed can be undone, if required, in a number of ways:
♦
Selecting Undo from the Edit menu.
♦
Pressing <Ctrl>+Z in the script code text field.
Cut to Clipboard
An area of script code can be moved to the Microsoft Windows Clipboard in a number of ways:
♦
Selecting the script code to cut, followed by Cut from the Edit menu.
♦
Selecting the script code to cut in the script code text field and pressing <Ctrl>+X.
Copy to Clipboard
An area of script code can be copied to the Clipboard, if required, in a number of ways:
♦
Selecting the script code to copy, followed by Copy from the Edit menu.
♦
Selecting the script code to copy from the script code text field and pressing <Ctrl>+C.
Paste from Clipboard
An area of script code can be copied from the Clipboard, if required, in a number of ways:
♦
Placing the I-beam cursor at the desired point in the script code field, followed by Paste from the
Edit menu.
♦
Placing the I-beam cursor at the desired point in the script code field and then pressing
<Ctrl>+V.
Insert Tab Code
A tab character can be inserted into the script code, if required, in a number of ways:
♦
Placing the I-beam cursor at the desired point in the script code field, followed by Tab from the
Edit menu.
Page 138
OMRON
Release 2.0
Advertisement
Table of Contents
