Disposal; Declaration Of Conformity / Manufacturer - Parkside PFS 710 - MANUEL 2 Operation And Safety Notes

Warranty / Disposal / Declaration of Conformity / Manufacturer
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport dam-
age, for wearing parts or for damage to fragile
components, e.g. buttons or batteries. This product
is for private use only and is not intended for com-
mercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
The warranty period will not be extended by re-
pairs made unter warranty. This applies also
to replaced and repaired parts. Any damage and
defects extant on purchase must be reported imme-
diately after unpacking the appliance, at the latest,
two days after the purchase date. Repairs made af-
ter the expiration of the warranty period are sub-
ject to payment.
GB
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: support.uk@kompernass.com
©

Disposal

The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical power
tools with the household rubbish!
In accordance with European Directive
2002 / 96 / EC (covering waste electrical and elec-
tronic equipment) and its transposition into national
legislation, worn out electrical power tools must be
42 GB/MT
collected separately and taken for environmentally
compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
© Declaration of conformity /
Manufacturer
We, Kompernaß GmbH, the person responsible for
documents: Mr Dennis Dohm, Burgstr. 21,
D-44867 Bochum, Germany, hereby declare that
this product complies with the following standards,
normative documents and EU directives:
Machinery Directive
(2006 / 42 / EC)
Electromagnetic Compatibility
(2004 / 108 / EC)
Applicable harmonized standards
EN 60745-1:2006
EN 60745-2-11:2003+A11
EN 55014-1:2006
EN 55014-2:1997+A1
EN 61000-3-3:1995+A1+A2
EN 61000-3-2:2006
Product designation:
Parkside Sabre saw PFS 710
Date of manufacture (DOM): 02 - 2010
Serial number: IAN 45836
Bochum, 31.01.2010
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifica-
tions in the course of product development.