Disposal; Declaration Of Conformity / Manufacturer - Parkside PFS 710 - MANUEL 3 Operation And Safety Notes

Warranty / Disposal / Declaration of Conformity / Manufacturer
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport dam-
age, for wearing parts or for damage to fragile
components, e.g. buttons or batteries. This product
is for private use only and is not intended for com-
mercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
The warranty period will not be extended by re-
pairs made unter warranty. This applies also
to replaced and repaired parts. Any damage and
defects extant on purchase must be reported imme-
diately after unpacking the appliance, at the latest,
two days after the purchase date. Repairs made af-
ter the expiration of the warranty period are sub-
ject to payment.
GB
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: support.uk@kompernass.com
©

Disposal

The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical power
tools with the household rubbish!
In accordance with European Directive
2002 / 96 / EC (covering waste electrical and elec-
tronic equipment) and its transposition into national
legislation, worn out electrical power tools must be
12 GB
collected separately and taken for environmentally
compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
© Declaration of conformity /
Manufacturer
We, Kompernaß GmbH, the person responsible for
documents: Mr Dennis Dohm, Burgstr. 21,
D-44867 Bochum, Germany, hereby declare that
this product complies with the following standards,
normative documents and EU directives:
Machinery Directive
(2006 / 42 / EC)
Electromagnetic Compatibility
(2004 / 108 / EC)
Applicable harmonized standards
EN 60745-1:2006
EN 60745-2-11:2003+A11
EN 55014-1:2006
EN 55014-2:1997+A1
EN 61000-3-3:1995+A1+A2
EN 61000-3-2:2006
Product designation:
Parkside Sabre saw PFS 710
Date of manufacture (DOM): 02 - 2010
Serial number: IAN 45836
Bochum, 31.01.2010
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifica-
tions in the course of product development.