Service Centre; Declaration Of Conformity / Producer - Parkside KH 3133 BENCH DRILL Manual

Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
Information
Q

Service centre

Q
The service centre for your country is shown in the
warranty documentation.
J Have your device repaired only by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
J
If the plug or mains lead needs to be
replaced, always have the replace-
ment carried out by the manufacturer
or its service centre. This will ensure that
your device remains safe to use.
E-3470_Table_Drill_PTBM500_Content_LB5.indd 33
Disposal / Information
Declaration of conformity /
Q
Producer
We, Kompernaß GmbH, Burgstr. 21,
44867 Bochum, Germany, hereby declare that this
product complies with the following EU directives:
Machinery Directive (98 / 37 / EG)
EU Low Voltage Directive
(2006 / 95 / EG)
Tested in acc. with
EN 61029 - 1: 2000 + A11 + A12
Electromagnetic Compatibility
(2004 / 108 / EG)
Tested in acc. with
EN 55014 - 1: 2000 + A1 + A2
EN 55014 - 2: 1997 + A1
EN 61000 - 3 - 2: 2000 + A2
EN 61000 - 3 - 3: 1995 + A1
Type / Description of product:
Bench press drill PTBM 500
Bochum, 31.03.2008
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
GB/MT 33
17.03.2008 16:23:05 Uhr