Interconnecting The Sdc 8000 System Components; Interconnecting The Consoles; Connecting A Cable String To The Central Unit; Interconnecting Several Central Units - Sennheiser SDC 8000 System Manual

Hide thumbs Also See for SDC 8000:
Table of Contents

Advertisement

Setting up the SDC 8000 system
48
other synthetics. Despite a thorough testing of the synthetics used by
us, we cannot rule out the possibility of staining.

Interconnecting the SDC 8000 system components

Depending on the expansion stage of your system, you have to:
interconnect the consoles (all expansion stages),
interconnect the central units (expansion stage 3),
connect a PC to the "master" central unit if the system is to be PC
controlled.

Interconnecting the consoles

To interconnect the consoles via the system cables:
Connect the black RJ 45 plug of the system cable to the OUT socket
of the console.
Connect the grey RJ 45 plug of the system cable to the IN socket
the console.
Note!
You can interconnect up to 15 consoles in one cable string.

Connecting a cable string to the central unit

After having interconnected the consoles, connect the cable strings to the
central unit. You can connect up to six cable strings to a single central unit.
To connect a cable string to the central unit:
Connect the black RJ 45 plug of the system cable to one of the RJ 45
sockets labelled PORT 1 to PORT 6
Connect the grey RJ 45 plug of the system cable to the IN socket
the first console of a cable string.
Initialize the consoles as described in the section "Turning on the
central unit for the first time" on page 76.

Interconnecting several central units

If you have to interconnect several central units, we recommend mounting
the central units into a rack.
To interconnect the central units:
At the first central unit, connect the black RJ 45 plug of the system
cable to the MASTER OUT socket
If the SLAVE IN socket
unit automatically becomes the "master".
Connect the grey RJ 45 plug of the system cable connected to the
"master" to the SLAVE IN socket
If the SLAVE IN socket
automatically becomes a "slave".
To connect additional "slaves", connect the SLAVE OUT socket of the
first "slave" to the SLAVE IN socket of the following "slave", and so on.
of the central unit.
.
of a central unit is not connected, this central
of the second central unit.
of a central unit is connected, this central unit
of
of

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents