Operating The Components Of The Sdc 8000 System; Operating The Delegate Units; Taking The Floor / Making A Request To Speak - Sennheiser SDC 8000 System Manual

Operating the components of the
SDC 8000 system
Depending on the type of
listen, take the floor or make a request to speak,
receive simultaneous interpretation,
participate in voting sessions.
In addition to the functions and features of the delegate units, the
chairman unit allows to:
start a voting session,
turn off all active conference consoles (priority function).
The interpreter consoles
The central unit is operated by the conference manager – either directly or
via an optional PC with software control.

Operating the delegate units

Taking the floor / Making a request to speak

In order to take the floor or make a request to speak, you have to press the
MICRO key . Depending on the conference mode chosen, you can either
take the floor immediately or you have to wait until your microphone is
turned on.
1. In "Direct Access" mode:
Press the MICRO key
If the speaker limit has not yet been reached, you can take the floor
immediately. The red signal light ring
LED on your console light up permanently, indicating that you can
now take the floor.
If the speaker limit has been reached, you have to wait until one of the
current speakers has finished speaking and passes on the "speaking
right". You then have to press the MICRO key
2. In "Fifo" mode:
In this mode, the speaker limit is 1.

Operating the components of the SDC 8000 system

delegate unit, conference participants can:
are exclusively used by the interpreters.
.
and the "Microphone active"
again.
25