Overview Of Buttons - Sennheiser MM 100 Instruction Manual

Examples of some of the pictograms that are used throughout this instruction manual:
Pictogram Meaning
The LED flashes once every 3 seconds.
3s
The LED flashes 3 times per second.
The LED flashes in a rhythmic sequence.
The LED flashes several times.
The pictogram "i"
This note provides important information!
Notes marked with the pictogram "i" provide important information on the use of the headset.

Overview of buttons

Button To be pressed
2 s
5 s
2 s
2 s
To ...
start or pause audio playback,
accept or end a call,
start searching mode
switch on/off, reject a call,
mute/unmute the microphone
enter pairing mode
increase the ring volume or
audio volume by 1 step
increase the ring volume or
audio volume continuously
reduce the ring volume or
audio volume by 1 step
reduce the ring volume or
audio volume continuously
Overview of buttons
Page
10
11
8
8, 11
13
9
13
13
13
13
5