Putting The Ac 3 Into Operation; Preparing The Ac 3 For Use - Sennheiser AC 3 - 03-09 Instruction Manual

Fastening the
stacking elements

Putting the AC 3 into operation

Preparing the AC 3 for use

Setting up the AC 3 on a flat surface
Place the AC 3 on a flat, horizontal surface.
The stacking elements (see "Accessories" on page 15)
are designed to help protect the operating elements
from damage or deformation, e.g. if the AC 3 is
dropped.
Fasten the stacking elements even if you do not
want to stack your AC 3.
Do not fasten the stacking elements when mounting
the AC 3 into a 19" rack (see page 9).
To fasten the stacking elements
Unscrew and remove the two recessed head screws (M4x8)
on each side of the AC 3.
Secure the stacking elements
using the previously removed recessed head screws (see
diagram).
Putting the AC 3 into operation
:
to the sides of the AC 3
7