Operating Controls - Sennheiser AC 3 - 03-09 Instruction Manual

Operating controls

ANTENNA COMBINER AC 3
ANT
RF OUT
STANDBY button
Operation indicator
4 status LEDs
– light up if the supply voltage for the transmitter is avail-
able at the BNC sockets
– go off if the BNC sockets
circuited or if transmitters are connected that are not of
the ew G3 series (e.g. transmitters of the ew G2 series)
Cable grip for cable of table top power supply
DC IN socket
for connection of NT 3-1 table top power supply
4 BNC sockets RF IN 1
RF inputs for connection of the transmitters
Each of these RF inputs can power one transmitter.
Air vents
BNC socket RF OUT
for connecting the transmitting antenna
DC
1
2
3
4
RF IN 1 RF IN 2 RF IN 3 RF IN 4
DC OUT 12V/350mA
USE NT 3-1 ONLY
DC IN
RF IN 1 to RF IN 4
RF IN 1 to
to RF IN 4
Operating controls
»
13,8V/3,5A
RF IN 4 are short-
5