Muting The Audio Signal Or Deactivating The Rf Signal - Sennheiser 100 - 01-09 Instruction Manual

Using the devices
22

Muting the audio signal or deactivating the RF signal

EM 100
To mute the audio signal:
When one of the standard displays is shown on the display panel, press the
STANDBY button.
"RX Mute On?" appears on the display panel.
Press the SET
SET
The audio signal is muted.
To unmute the audio signal:
Press the STANDBY
"RX Mute Off?" appears on the display panel.
Press the SET
SET
The muting is canceled.
SK 100
·
·
The MUTE switch allows you to mute the audio signal or to deactivate the RF signal. Via the
"Mute Mode" menu item, you can set the desired function of the
Slide the MUTE switch · ...
Setting
"Disabled" ... to the left (position MUTE)
"RF On/Off" ... to the left (position MUTE)
... to the right
"AF On/Off" ... to the left (position MUTE)
... to the right
From the "Mute Mode" menu item, select the desired setting (see page 27).
Exit the operating menu.
Slide the MUTE switch
The bodypack transmitter reacts as indicated in the table.
button.
button.
button.
AF
·
to the left, to the position MUTE.
543.200 MHz
ew100 G3
P
MUTE
switch ·:
MUTE
Function
None
Deactivates the RF signal
(offline operation)
Activates the RF signal
(online operation)
Mutes the audio signal
Unmutes the audio signal