Installation Of Receiver - THOMSON VS 660 Manual

VS660 - 5 langues 17/04/03

Installation of receiver

1. Place the receiver (5) on, or near, the second television set.
2. Connect the receiver (5) to the second television set using the lead (6) following
the same instructions as for the transmitter.
3. Extend the antenna on the receiver (5) and orient it toward the main TV set (TV1).
4. Fit the mains supply lead (7) to the receiver and plug it into a 220/240 V ~ 50 Hz
mains power supply.
! THE ANTENNA allows you to transmit and receive audio and video signals over a
maximum range of 30 meters in free air environments. Inside a typical lodgment the
range will be less because of signal attenuation by building material absorption.
! THE FLEXIBLE ANTENNA permits the control of the unit whose pictures you wish
to see in the room containing the second television set (TV2).
! THE POWER SUPPLY plug fitted to the transmitter (1) is not the same as the one
fitted to the receiver (7).
TV2
11:38 Page 6
Re cei ver
6
YELLOW
6
220/240V ~ 50 Hz
5 7
LEFT RIGHT
IR OUT VIDEO IN AUDIO IN DC 12V
AUDIO OUT
VIDEO OUT DC 12V
L R
WHITE RED
VS 660 U
VS 660
VS 660 SP