Dear Customer: Thank you for purchasing our latest TV set. Please read this instruction manual carefully first before operation so that you can use it in a safe and reliable manner. Please also store it safely for future reference. Contents I.
Safety and Precautions To ensure safe and reliable operation of the TV set, please observe the following precautions in installation, operation and maintenance. A A A A ttention ttention: : : : ttention ttention 1·Pay attention to the power supply cord before installing the TV set. Do not hang anything on the cord, and avoid treading on the cord.
Installation First read carefully the relevant instructions in “Safety and precautions”. Place the TV set in the room where there is no direct sunlight on it. Any light reflecting from the screen will cause eye fatigue. Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~7 times the screen height.
Installation Remote Control Preparation Installing the batteries Load two Size AAA batteries into the Remove the sliding cover chamber, with the +/- poles of batters in line from the remote control. with the +/- marks. Precautions in operating the remote controller ●...
Control Location Television Front Panel & Input/ Output Terminals The control buttons are in the front of the TV (below the picture tube), behind the cover. 1. Main power switch 2. Remote control sensor 3. Power indicator 4. Program number up (+) and down (-) 5.
Names and Functions of Controls Remote control Buttons on remote controller: 1. AV status switch button 13. Standby button 2. TV switchover 14. Screen display button 3. Sound system button 15. Colour system button 4. Game button 16. I/II button (The button is non-functional.) 5.
12. Mute button 24. Picture Mode button Operating Instructions Turn the power supply ON/OFF 1. Press the power switch, the power indicator will be on, and after several seconds, the tv set will begin normal operation. 2. Press the button on the remote controller, the television will be in standby mode and The power indicator will be on but the screen off.
TV Operation Program Selection 1 Selecting a desired program Use the direct Program number Selection buttons Press the number buttons 0-9 on the remote control to select the single digit program number (0-9). Press the “-/--” button on the remote control to display to select double-digit programs. You can press number buttons 0-9 to select Program number (10-99), by first selecting the tenth digit then the unit digit;...
TV Operation Start operation: Adjustment 1 Program preset (auto search) When you turn on the TV set for the first time, you must select the “MENU” button continuously on the TV or the remote control, so that the following menu is displayed on the screen: TUNING PROG.
Page 11
TV Operation Start operation: Adjustment TUNING PROG. 1 AUTO STORE SEARCH SEARCH SEARCH SEARCH FREQ.FINE BAND VHF-L You can first use P+/P- or direct program number on remote control to select the program number you want to tune manually. Once the channel is selected press “MENU” button until you enter the “TUNING”...
TV Operation Start operation: Adjustment TUNING PROG. 1 AUTO STORE SEARCH SEARCH SEARCH SEARCH FREQ.FINE BAND VHF-L 4 Skip over undesired Program Number After program preset, you can use this function to skip over the undesired Program Numbers to choose only the desired Program Numbers You can first use “P+/P-”...
TV Operation Basic operation: Picture and sound control 1 Mute and screen display Mute The Mute function may be used to mute sound. When you need mute, press the “Mute” button on the remote controller, and the screen will display the red characters “MUTE”. If you want to restore the sound, press the “Mute”...
Page 14
TV Operation Basic operation: Picture and sound control Set your desired picture mode Press “MENU” once or “PICTURE” button to show “Picture” menu on the screen, then press “P+/P-” to select the item you want to adjust. Press “V+/V-” to adjust the effect. PICTURE BRIGHT BRIGHT...
TV Operation Basic operation: Setting time With this function, you can watch the preset program or place the TV set in standby mode at set time. For example, if it is 18:28 now, and you want to watch Program 6 at 19: 00, and turn off at 22:30 (standby);...
TV Operation TIMING CLOCK --:-- TIMER ON --:-- PROGRAM Basic operation: Setting the sleep Time, screen display language and auto volume limit 1. Setting Sleep Time You can set the Sleep Time directly. In TV mode press “MENU” button four times or directly press “TIME” button, to enter “TIMING”...
TV Operation white to green), and press “V+/V-” to set AVL to “ON” or “OFF”. When AVL is set to “ON”, Basic operation: Select blue background and black stretch Selecting blue background Press the “MENU” button three times or press directly “FEATURE” button to show and enter “FEATURE”...
TV Operation Program order arrangement After auto search, there may be some repeated Program Numbers and some blank Program Numbers. To skip over these Program Numbers and arrange the desired Program Numbers, you can do the following: Press the “MENU” button 6 times or press directly “SWAP” button on the remote controller, so that the screen displays the “PROG.
Connect with Other Devices Connect CD, VCD, DVD or other sound, picture and audio or video output devices Video television, VCD, DVD, game set or other sound and picture output devices RF output To antenna input Video television, CD, satellite receiver or other sound and picture output devices To video input VIDEO OUT...
Miscellany Guide to simple trouble-shooting The following phenomena are not necessary faults, and the following checks should be performed first before asking a specialized person for repair. If the cause of fault cannot be found and corrected with this guideline, remove the power plug from the socket and have a specialized person to repair it. Inspection Symptom Is the fuse or breaker in the house OK?