Advertisement
Automatic channel search
In order to view TV channels with this equipment you must first of all tune them in.Tuning consists
of searching then memorising the frequencies of the various channels that your antenna can receive.
Follow the instructions below to start then continue by following the instructions that will appear
on your screen.
1. Turn your equipment on (POWER ON button).
2. Point the remote control at the infrared window on your set and press the SETUP button on
the remote once.The main menu will appear.
MUTE
PROG/EPG
AV IN
MODE
BOOK MARK
1
2
3
SUBTITLE
4
5
6
AUDIO
7
8
9
ANGLE/TTX
0
10+
TIME
SCAN
DISPLAY
SETUP
STEP
ENTER
DIGEST
TFT
FUNCTION
ON/OFF
TV RADIO
MENU/PBC
TITLE
REPEAT
FAVORITE
RETURN
A-B
ZOOM
SLOW
REV
FWD
PREV
NEXT
PLAY/PAUSE
STOP
VOL-
VOL+
3. Select the DVB-T menu (u button).
4. Select Area then your country of residence (p, q, t, u buttons then ENTER).
5. Select Channel Setup (p, q, t, u buttons then ENTER).
6. Select Auto Scan then Start (p, q, t, u buttons then ENTER).
Once you have completed your search, the images from one of the channels will appear on the
screen.
Manual search
1. Select the Manual Scan option then Start (p, q, t, u buttons then ENTER).
2. You can search for channels by their frequencies. Use the t and u buttons to show the
frequency, then press ENTER to start scanning.
3. Once the search has been completed, press ENTER to add the new channels you have found.
Change of language
1. In the General Setup Page menu, select the OSD Lang option then choose the language
you require p, q, t, u buttons then ENTER).
2. Press SETUP to leave the menu.
01_DTH725_EN.indd 4
Navigation buttons: Use the 4 navigation buttons (p, q,
t, u) and the ENTER button to move to and select the
ENTER
options on the menus.
General Setup Page
TV Display
Wide
OSD Lang
ENG
Captions
Off
Divx subtitle
WE
Divx VOD
4
16/01/07 20:49:42
Advertisement
