THOMSON DTH740 User Manual

Safety Information Precautions
English
CAUTION! General Precautions
• Water and Moisture - Do not use this
product near water for example, near
Invisible laser radiation when open. Avoid exposure to
beam. Class 1 laser product. This system must be opened a bathtub, wash bowl, kitchen sink, or
only by qualified technicians to prevent accidents caused laundry tub; in a wet basement; or near
by the laser beam. a swimming pool; and the like. Do not
LASER λ = 650 nm, P max = 5 mW
spill liquids on your Portable DVD or its
Rating Information: At bottom/rear of the unit. components as they may touch danger-
This unit comply with the existing requirements.
ous voltage points or short-out parts that
could result in a fire or electric shock.
In accordance with the rating plate of the
To clean your Portable DVD use a soft
unit, this unit complies with current standards
slightly damp cloth. Always allow all the
concerning electrical safety and electromagnetic
components to dry completely before
compatibility.
using again.
Please respect the environment. Before throwing
any batteries away, consult your distributor • Cleaning - Unplug this product from the
who may be able to take them back for specific wall outlet before cleaning. Do not use
recycling. liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
Have a Blast- Just Not in Your Eardrums! Make
sure you turn down the volume on the unit
• Heat - The product should be placed
before you put on headphones. Increase the
away from heat sources such as radiators,
volume to the desired level only after headphone
heat registers, stoves, or other products
are in place.
(including amplifiers) that produce heat.
Do not expose the Portable DVD or any
This symbol means that your inoperative elec-
of its components to extreme heat or
tronic appliance must be collected separately
and not mixed with the household waste. The cold. Do not expose the player to direct
European Union has implemented a specific sunlight.
collection and recycling system for which manu-
facturers are responsible. • Attachments - Do not use attachments
This appliance has been designed and manufac-
not recommended by the product manu-
tured with high quality materials and components that can
facturer as they may cause hazards.
be recycled and reused. According to
Electrical and electronic appliances are liable to contain
UL1492, letter CAUTION
• Servicing - Do not attempt to service this
parts that are necessary in order for the system to work
product yourself as opening or removing
size of RISK OF ELECTRIC SHOCK
properly but which can become a health and environmental
DO NOT OPEN
covers may expose you to dangerous
hazard if they are not handled or disposed of in the proper
WARNING T H E L I G H T N I N G CAUTION: TO REDUCE THE
THE EXCLAMATION
way. Consequently, please do not throw out your inopera- voltage or other hazards. Refer all servic-
FLASH AND ARROW- RISK OF ELECTRIC SHOCK, POINT WITHIN THE
should be 2.8 EN
tive appliance with the household waste. HEAD WITHIN THE D O N O T R E M O V E C O V E R T R I A N G L E I S A ing to qualified service personnel.
T R I A N G L E I S A ( O R B A C K ) . N O U S E R - WARNING SIGN
If you are the owner of the appliance, you must deposit it and 1.6 W A R N I N G S I G N S E RV I C E A B L E PA R T S I N - ALERTING YOU OF
ALERTING YOU OF S I D E . R E F E R S E RV I C I N G I M P O R T A N T
at the appropriate local collection point or leave it with the • AC/DC power adapter cords should be
" D A N G E R O U S T O Q U A L I F I E D S E R V I C E I N S T R U C T I O N S
vendor when buying a new appliance. VOLTAGE" INSIDE PERSONNEL. A C C O M PA N Y I N G
routed so that they are not likely to be
THE PRODUCT. T H E P R O D U C T.
6/11/01
• If you are a professional user, please follow your supplier's walked on or pinched by items placed
SEE MARKING ON BOTTOM / BACK OF PRODUCT
instructions.
upon or against them, paying particular
• If the appliance is rented to you or left in your care, WARNING:
TO PREVENT FIRE OR ELECTRICAL
attention to cords at plugs, convenience
please contact your service provider. SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
receptacles, and the point where they
Help us protect the environment in which we live! TO RAIN OR MOISTURE.
exit from the product.
Quick Start & Player Setup DVD Playback
Accessories Playback
Rating feature is a parental guardian feature
ATTENTION
Check that all the following accessories come which disables playback of certain DVDs based For basic playback, refer to "Quick Start".
RISQUE D'ELECTROCUTION
with your unit in the package: on their ratings from 1 (most restive) to 8 (least
NE PAS OUVRIR Note: The player stores the point where
1. Audio/Video cable x 2 restrictive). DVDs that are rated above the level
playback was interrupted. If you press PLAY/
L'ÉCLAIR AVEC LA ATTENTION: POUR REDUIRE
LE POINT
2. Lithium ion Polymer Battery x 1 you set will not play until the correct password LES RISQUES
POINTE EN FORME D'EXCAMATION A PAUSE again, playback resumes from this
DE FLECHE A D'ELECTROCUTION, NE PAS L'INTERIEUR DU
3. AC/DC power adapter x 1 is entered. point. To stop playback completely or to start
L'INTERIEUR DU OUVRIR LE CORPS (OU LE TRIANGLE EQUILA-
TRIANGLE BOÎTIER ARRIERE) DE CET TERAL EST UN
from the beginning, press STOP twice.
4. Car power adapter x 1 EQUILATERAL EST APPAREIL. LES PIECES
SYMBOLE AVER- F
If a password has been set, you cannot change INTERNES DE CET APPAREIL
UN SYMBOLE TISSEUR VOUS
5. Carrying case x 1
the rating without entering the correct password. AVERTISSEUR NE NECESSITENT AUCUNE RENVOYANT A DES
Accelerated Play
VOUS INFOR-MANT MAINTE-NANCE FAITES INSTRUCTIONS
6. DVB-T decoder x 1
To set up the password, highlight the Password DE LA PRESENCE APPEL A DU PERSON-NEL IMPORTANTES AC-
D'UNE "TENSION QUALIFIE POUR TOUTE While the disc is playing, press REV or FWD
7. Antenna x 1 part to input a 4-digit password with the numeric COMPAGNANT CE
OPERA-TION DE
DANGEREUSE" A PRODUIT.
one or more times to vary the speed and
8. Remote controller x 1 keys on the remotr control. Press OK to set the L'INTERIEUR DE MAINTENANCE.
L'APPAREIL direction of the accelerated play. Press PLAY/
password.
VOIR MARQUAGE SUR L'ENVERS / AU DOS DE L'APPAREIL
PAUSE to resume normal playback.
Quick Start Note:password is not defined until you set.
AVERTISSEMENT:
POUR EVITER LES RISQUES
1. Press POWER ON/OFF to turn on the
Still Image
Language Setup D'INCENDIE OU D'ELECTROCUTION, NE PAS LAISSER
player. The DVD logo appears on the
CET APPAREIL SOUS LA PLUIE OU A L'HUMIDITE.
Setup the language of the OSD, Audio, Subtitle While the disc is playing, press PLAY/PAUSE
screen.
and Menu. Also register your DivX VOD files in once to freeze frame.
2. Open the disc compartment door. Place
the DivX[R] VOD menu (see "More Information"
a disc in the tray with the printed side
for details). Frame Advance
up. Push back the compartment door.
• For DivX playback, you need to select the
The player will automatically try to read While the disc is paused, press STEP (remote
correct character set between Western and
and play the disc. If a menu appears, control) to activate STEP mode. Each press
Central European in "Divx Subtitle" in order
one of its options can be selected to of STEP will advance forward image by
to display properly subtitles in some eastern
start playing the disc. Select it using V image. Press PLAY/PAUSE to resume normal
European languages.
playback.
keys and press OK.
VORSICHT
Player Setup Audio Setup Changing Chapter / Track
GEF AHR EINES
Setup the audio output format.
While the disc is playing, press SKIP REV /
When disc playback is stopped, press SETUP ELEKTRISCHEN SCHLA GS
and the player's setup menu will show on FWD to go immediately to the next or previ-
DER BLITZ UND DIE VORSICHT: ZUR DAS
Video Setup
PFEILSPITZE IM REDUZIERUNG DER GEFAHR AUSRUFEZEICHEN
screen. ous chapter, or to the next or previous track.
Setup the brightness, contrast, hue and saturation DREIECK SIND EIN EINES ELEKTRISCHEN IM DREIECK IST EIN
SCHLAGS NICHT DIE D
WARNZEICHEN, WARNZEICHEN,
levels.
DAS SIE AUF ABDECKUNG (ODER DAS SIE AUF
Select a menu icon using keys. Then select Repeat Playback
"GEFÄHRLICHE RÜCKSEITE) ENTFERNEN. WICHTIGE, DIESEM
STROMSPANNUNG KEINE VOM NUTZER ZU PRODUKT
one of the available options using V keys.
Digital Setup " IM INNEREN DES WARTENDEN TEILE IM BEIGEFÜGTE During playback, press REPEAT repeatedly
Press key to access the submenus and use V INNEREN DES GERÄTS.
PRODUKTS INSTRUKTIONEN to select repeating a chapter or a title (DVD
Setup the DRC (Dynamic Range Compression).
AUFMERKSAM ÜBERLASSEN SIE DIE AUFMERKSAM
keys to select an option. Press OK to confirm
MACHT. WARTUNG QUALIFIZIERTEM MACHT. discs).
your selections. Return to a previous menu FACHPERSONAL.
using key. SIEHE MARKIERUNG AUF DER GERÄTEUNTER- /
A-B Repeat
GERÄTERÜCKSEITE DES PRODUKTS
WARNUNG: During playback, press A-B (remote control)
To exit from the player menu, press SETUP ZUR VERMEIDUNG EINES BRANDES
ODER DER GEFAHR EINES ELEKTRISCHEN once at the start and press again at the end
again.
SCHLAGS DAS PRODUKT KEINEM REGEN ODER of a desired repeat section. The section will
FEUCHTIGKEIT AUSSETZEN.
repeat continuously until you press A-B to
System Setup
resume normal playback.
Setup the source, TV system, TV type,
password, rating, screen format and restore to
default settings.
TV function TV function (cont'd)
DVB-T decoder Using the remote control
Getting started
To use the remote control with your DVB-T 1. Once the decoder has been switched on,
�
a menu appears on the screen. Use the
decoder, set the switch on the remote control
keys to select the language for the
to DVB-T.
�
menus.
2. Press V and select a country. Use the
�
Always point the remote control at the IR
keys to choose a country.
�
reception window on the decoder, otherwise
Select OK to confirm.
3.
the decoder will not respond to the com-
4. A new menu appears to select the
mands sent from the remote control.
�
required TV image format (4/3 or 16:9).
Use the
Antenna
Settings and use of the decoder
and select OK to confirm.
Change the settings using the MENU, , , V, 5. Once you have confirmed your choice,
, OK keys on the remote control. the device starts searching for the avail-
The MENU, ENTER, CH+, CH- keys on the rear
able TV and radio channels.
of the decoder can also be used to navigate
Rear Side
in the menus.
Favourite lists
� � � � �� �� ��
The concept behind the channel list is to
Setting up the decoder
make it easy for you to access the channels
you spend the most time watching or radio
1. Connect the DVB-T decoder to the rear
stations you listen to most frequently.
of your DVD player.
Once a list has been defined, you can press the
1. DVB-T decoder 2. Insert the mains power adapter plug in
FAV button to activate your favourites list.
2. Antenna socket the DC socket on the decoder.
Then when you change channels using the
3. IR window
3. Insert the power plug of the adapter in
V buttons, only your favourite channels or
4. A/V and DC IN/OUT sockets
a mains wall socket or in an adapter for
stations are included in the loop.
5. Antenna
vehicles.
1. Press MENU and select the Favourite
6. Power socket
4. Connect the antenna cable to the socket lists line using V .
7. Power On light
provided and place the antenna on
2. Select OK to confirm.
8. Decoder On/Off switch a metal surface that acts as a ground
3. Use V to select, create, edit or delete
9. Open the main menu of your DVB-T plane for the antenna for better recep-
your favourites. Select OK to confirm.
decoder
tion.
Follow the instructions using the , ,
10. Enter the menu
5. Press to switch on the DVD player.
V, , OK keys.
11. Move up in the menu / Select the next
6. Press the ON / OFF switch on the rear
channel 4. Press MENU to return to the main
to switch on the decoder.
menu.
12. Move down in the menu / Select the
previous channel
DTH740-ENnew.indd 1
General Controls
• Power Sources - This product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your product dealer or local
power company. Do not use any battery
other than the orginal ones provided by
Thomson.
• When using your Portable DVD player, do
not sit or stand too close to the screen.
Main plug is used as the disconnect device, it shall
remain readily operable and should not be ob-
structed during intended used. To be completely
disconnected the apparatus from supply mains,
the main plug of the apparatus shall be discon-
nected from the mains socket outlet completely.
DVD Playback
Random Playback Displaying Playback Information
Press DISPLAY repeatedly during playback to
Press RANDOM (remote control) to select random
mode on or off. Tracks or chapters will be played show various playback information on screen.
They include current title and chapter, play-
in random order when the function activated.
back time, audio, subtitle and angle settings.
Searching
Changing Audio and Subtitle
Press SEARCH (remote control) to enter search
Settings
menu (show on top of the screen). For DVD, you
can direct access to a title, chapter or time on On the player, press DISPLAY during playback
the disc by inputting the values with the numeric and then press repeatedly to change audio
keys on the remote control. Press to select a setting and press repeatedly to change
search method (title, chapter or time). subtitle setting.
On the remote control, press LANGUAGE (for
Program Playback audio) or SUBTITLE (for subtitle) repeatedly
for corresponding setting.
When playback is stopped, press PROGRAM
(PROG on the remote control) to show the
Tips: For VCD playback, press DISPLAY once
program menu.
and then press repeatedly to select audio
1. Highlight an input field by using V
channel: mono left, mono right or stereo;
keys. "T" stands for title and "C" for
press repeatedly to select PBC mode (if
chapter.
available on the disc) on or off. Alterna-
2. Use the numeric keys on the remote control
tively, press LANGUAGE (for audio channel
to input values.
selection) or PLAYBACK CONTROL (for PBC
3. Repeat steps 1 and 2 to program more. on/off) repeatedly on the remote control for
4. Highlight "PLAY" on screen and press OK corresponding setting.
to start playback. Highlight "CLEAR" on
screen and press OK to clear all programs. Changing Angle
Press ANGLE (remote control) repeatedly
to select angle setting (if available on the
DVD disc).
Accessing Disc Menu
At anytime during playback, press TOP MENU
(or MENU on the remote control) to access
disc's menu and press TITLE to access disc's
title menu (if available).
Zoom
During playback, press ZOOM (remote control)
repeatedly to select a zoom in or out option to
enlarge or reduce image size.
TV function (cont'd)
Setup Signal information
This menu indicates the level of reception and
Use this menu to change the TV reception set-
the quality of the signal received according to the
tings, to set the time and date and to restore the
selected channel number.
system's factory settings. If you restore the factory
Channels installation
settings, all your settings will be deleted.
Use this function to re-install all the TV and radio
1. Press MENU and select the Setup line using
channels. You can also add more channels to the
V .
list of channels that has already been memorised.
2. Select OK to confirm.
Channel searches can be run automatically
3. Use V to select, create, edit or delete your
(Standard) or manually (Manual) depending on
favourites. Select OK to confirm. Follow the
key to make your choice
the level of reception of the antenna in the place
instructions using the , , V, , OK keys.
where the device is located.
4. Press MENU to return to the main menu.
You can also search for unencrypted channels
TV Configuration
only, encrypted channels only or both.
Select the image format (4/3, 16:9), the display
New channels
mode (PAL, SECAM) and the sound settings
Use this menu to install new channels.
(mono, stereo).
Time Settings
User preferences
Set the date, time and time zone.
Use this menu to configure your preferences for
Factory Settings
the language used for the menus, subtitles and
Delete all settings and restore the factory
sound. Other visual settings are available, includ-
configuration.
ing subtitles and menu banners. You can also
Installation
configure the parental control settings.
This menu indicates the quality of signal recep- 1. Press MENU and select the User preferences
tion and can be used to re-install channels or add line using V .
new channels. 2. Select OK to confirm.
3. Use V to select, create, edit or delete your
1. Press MENU and select the Installation line
favourites. Select OK to confirm. Follow the
using V .
instructions using the , , V, , OK keys.
2. Select OK to confirm.
4. Press MENU to return to the main menu.
3. Use V to select, create, edit or delete your
favourites. Select OK to confirm. Follow the Languages
instructions using the , , V, , OK keys.
This menu is used to configure your language
4. Press MENU to return to the main menu.
preferences for the menus, subtitles and sound.
General Controls
1. LCD display 36. Selects display information
2. Speakers 37. Selects DVD's angle setting
3. Selects display information
38. Returns to top of menus
4. Enters player's setup menu or disc's 39. Enters search menu
menu
40. (STOP) - stops playback
5. Returns to disc's menu
41. (PLAY/PAUSE) - starts and pauses playback
6. Enters disc's title menu (if available)
42. (SKIP FWD/ SKIP REV) - skips backward or
7. Accesses repeat and program modes forward a chapter or track
8. Searches forward 43. Selects random playback mode
9. Searches backward 44. Enters program mode
10. Stops playback 45. DVB-T / DVD
11. Starts and pauses playback
46. Enters player's setup menu
12. Moves upward in menu 47. Numeric input keys
13. Moves leftward in menu, selects audio
48. Selects subtitle setting
setting
49. Navigation keys in indicated direction, press
14. Confirms selections
OK to confirm selection
15. Moves downward in menu 50. Selects language setting
16. Moves rightward in menu, selects 51. Enters title menu (if available)
subtitle setting
52. Enters step advance mode
17. Disc compartment door
53. Adjusts volume
18. Skips forward a chapter/track
54. (FWD / REV) - search backward or forward
19. Skips backward a chapter/track
55. Selects repeat modes
20. Adjusts volume
56. Performs A-B repeat
21. Switches on / off the player
22. Opens disc compartment door
Notes on the remote control
23. Headphone jacks On the remote control, remove the plastic tab
24. Function switch from the battery compartment before first use. To
replace battery, slide the release lock to the right
25. USB connector
and pull out the battery tray. (One button type,
26. Audio input / digital output jack
CR2025 battery required)
27. Video in / out jack
28. Power jack When using the remote control, make sure you
are pointing to the remote sensor located at the
29. Power indicator
front of the player (where the power indicator
30. Low battery indicator
is located).
31. Muting sound
32. Clears input CAUTION
Danger of explosion if battery is incorrectly
33. Enters disc's menu
installed.
34. Enters VCD playback control menu
Replace only with the same or equivalent type
35. Selects zoom options
of battery.
Playback of Various Media Formats
Muting Playback of MP3, WMA and Playback via USB Connector
JPEG Files
Press MUTE (remote control) to cut sound output. MP3, WMA and JPEG files stored on a USB device
Press again to restore. Your player also supports playback of MP3, can be played via the USB connector on the rear
side of the player. Playback operations are the
WMA and JPEG files. When a disc is loaded,
Screen Saver and Power Saving the player will automatically search for sup- same as files on discs as shown above. When an
USB device is connected, a selection menu appears
ported files and begin playback automatically.
Screen saver will show when the player is idle for
During playback of MP3 and WMA files and on the screen for playback from USB or disc.
more than 5 minutes. Press any key to de-activate
stop mode of JPEG files, the following screen
it. If there is no further key activation for another
Audio CD
will appear:
5 minutes, the LCD screen will shut down for
power saving. Press any key to turn the screen Your player also supports playback of audio CD.
on again. Name of current file Playback starts automatically after an audio CD is
loaded. Program playback is available for audio
CD, refer to "Program Playback" for details. You
only need to input the desired track numbers.
File directory in
Folder directory
current folder
• Use V keys to move to different
files or directories.
• Press OK to play the file highlighted.
• While viewing JPEG files, press V
keys will rotate or flip picture respec-
tively.
• Program playback is available for mp3
and WMA discs, refer to "Program Play-
back" for details. Input folder number
under column "D" and file number
under column "F".
More Information
Appearances Car Mounting
Certain visual settings, such as subtitles and menu
You can easily mount the player on the back of a car seat with the help of the carrying case. See
banners, can be configured in this menu. Choose illustration below:
your settings and select OK to confirm.
Elasticated strap
Access control
This function lets you prevent or limit access to
certain channels.
DVD player
System information
1. Press MENU and select the System informa-
tion line using V .
2. Select OK to confirm.
3. The screen that appears shows the technical
Clasp strap
characteristics of your DVB-T decoder.
4. Press MENU to return to the main menu.
Carrying case
Registration for DivX VOD Files
DivX VOD files are downloaded after paying a rental from certain commercial websites. Prior to
downloading a VOD, you need to input the registration number of your DVD player on the purchase
form on the site. The registration number can be located in the Setup Menu under the "Language"
submenu.
Note: If you cannot play a DivX VOD file recorded on a CD-R disc after downloading it, the rental period
allocated during purchase from the website may have expired. It is also possible that the recorded
file is not compatible with your player because of different versions or incorrect download param-
eters. The parameters used when copying to CD-R may be another reason for this. Since it is not
possible here to supply all the information, parameters and advice relating to the use of DivX VOD
files, we recommend that you visit specialist websites such as www.divx.com/vod.
Connections
Tocom: 56384680
Connecting the Power Adapter External Connections
• Connect the power adapter to the DC This player can output sound and picture to ex-
jack of the unit.
ternal devices. To do so, slide the Function Switch
on the rear side of the unit to the DVD MODE
• Connect the other side of the
power adapter with the wall plug or car position. Always switch off the player before
connecting to any devices.
adapter.
1. Connect the smaller yellow connector to the
• Turn on the power.
VIDEO IN/OUT jack of the player.
• Disconnect the adapter if the set is not
2. Connect the larger yellow connector (with
used for a period of time.
pin) to the video input jack of external
device.
Installing the Battery
3. Connect the black connector to the AUDIO
• Plug in the battery at the bottom of the IN/DIGITAL OUT jack of the player.
unit.
4. Connect the orange connector (with pin) to
• Slide the battery to the side until a the audio input jack of the external decice.
"click" is heard.
• The unit is now powered by the battery. This player can also be used as a display for other
devices, such as DVD player, game console etc. To
do so, slide the Function Switch on the rear side
Removing the Battery
of the unit to the AV IN position. Always switch
• Turn the unit upside down.
off the player before connecting to any devices.
1. Connect the smaller yellow connector to the
• Locate the lock at the bottom.
VIDEO IN/OUT jack of the player.
• Push down the lock and slide the bat-
2. Connect the larger yellow connector
tery to the side to release.
(without pin) to the video output jack of
external device.
Charging the Battery
3. Connect the black connector to the AUDIO
• Connect the power adapter to the IN/DIGITAL OUT jack of the player.
power jack of the unit.
4. Connect the white and red connectors
• Turn off the power to start charging. (without pin) to the audio output jacks of
• The indicator is red when charging and the external decice.
will turn green when the battery is fully
charged.
• The battery cannot be charged while
the unit is being used.
EN
Please read this user manual carefully to ensure proper use of this product. Keep this manual for future reference.
More Information Games
DVD Regional Code Specifications Getting started
The system includes 30 games.
Your DVD player has been designed to process • Model: DTH740DVBT
regional management information that is stored • TV System: PAL/NTSC
To play the games, set the function switch on
on DVD discs. The regional code for your player
• Supported Disc Formats: DVD, SVCD, VCD, the rear of the device to GAMES MODE. A
is 2 (Europe, Japan, the Middle East, Egypt, South
CD, HDCD, CD-R, CD-RW, DVD+/-R, DVD+/-
welcome screen appears.
Africa). Only DVD discs that have regional codes
RW
of 2 or ALL (for all regions) can be played by
• Supported File Formats: DivX, MPEG, MP3,
your player.
WMA, JPEG, Kodak Picture CD Choosing a game
• DVD Regional Code: 2
Press RTN / START to view the list of games.
DVD Copy Protection
• AV Input/Output: Composite x 1
This product incorporates copyright protection • Power Requirement: DC in 9V (power 1. Press V
technology that is protected by U.S. patents and adapter bundled) 2. Highlight the game you want to play
other intellectual property rights. Use of this copy-
• Power Consumption: <10W and confirm by pressing RTN / START.
right protection technology must be authorized
• Operating Temperature: 5 o C to 35 o C (41 o F to
by Macrovision Corporation, and is intended for
95 o F)
home and other limited consumer uses only unless
Playing the games
• Operating Humidity: 5% to 90% (no
otherwise authorized by Macrovision. Reverse
condensation)
engineering or disassembly is prohibited. 1. Press V
• Size (without battery): 200(W) x150(D) x 2. Use the A, B, TA, TB keys to play.
32(H) mm
These keys have different functions in differ-
• Weight: 1087g ent games.
3. Press OK / RESET to quit the game.
The descriptions and characteristics in this owner's manual are for the purpose of general reference only and
not as a guarantee. In order to provide you with the highest quality product, we may make changes or modi-
fications without prior notice. The English version serves as the final reference on all product and operational
details should any discrepancies arise in other languages.
Troubleshooting Tips
The unit is not working.
• Turn off the power, and then turn it on
again.
• Make sure power cord or battery is
properly connected and battery is not
empty.
• The unit cannot operate when the car
adaptor power supply voltage is above
16V.
There is no sound or picture.
• Check the connection to the mains
socket or battery.
• Make sure the power switch is on.
• Make sure the power outlet is opera-
tional.
• Make sure the power cord is not dam-
aged.
• Make sure the volume is not set too
low.
There is no sound or sound quality
is poor.
• Make sure the audio jacks are securely
connected.
• Make sure the audio connector is not
damaged.
• Make sure the volume is turned up.
• Make sure you have set the player's
audio settings correctly.
• Make sure you have entered the correct
AV input for your TV.
THOMSON
• Make sure the audio is not set to mute.
46, quai Alphonse Le Gallo
92648 Boulogne There is no picture or picture quality
is poor.
Cedex FRANCE
• Make sure that the Function Switch is
on the proper position.
www.thomson.net
u s e r
m a n u a l
DTH740DVBT
Games included
- Delta Fighter
- Space Castle
- VR Racing
- Sea War
- Dragon Fire
- Golden Arrow
- Push the Box
- Bean's Adventure
- Ball Clash
- Block Out
- Road Star
to scroll through the list.
- Super Surfing
- Bubble Blaster
- Fish Catcher
- Ball Mania
- Grass Cutter
- Jewel Master
- Motor Rally
to navigate in the game.
- Birdie Nest
- Insect Chase
- Bingo Zap
- Last Cabra
- Ocean Quest
- Pinball Track
- Runner Car
- Spin Ball
- Animal Pool
- Go Bang
- Garden Maze
- Submarine War
• Make sure the video jacks are securely con-
nected.
• Make sure you have entered the correct AV
input for your TV.
• Make sure the video connector is not dam-
aged.
• Make sure you have set the player's video
settings correctly.
• Make sure the battery level is not low.
It is impossible to read the disc
• Make sure the disc is inserted with the
printed side up.
• Make sure the disc is not warped, damaged,
deformed, stained or scratched.
• Check that the disc format is supported by
the player.
• Check that the disc's regional code matches
that of the player. This player's regional
code is 2.
Remote control is not working
• Battery may be empty.
• Make sure you are pointing to the remote
sensor on the player while using.
You have forgotten your rating pass-
word.
• Enter 9688 in the password menu to clear
the memory. Keep this master password out
of the reach of children. Refer to "Player
Setup - System Setup" for details.
2/08/06 20:02:06