Advertisement
AccurioShine 101
C.6
Touch Panel
SET
Mode
Type
Laminate
1
Whole laminate
except front side
Dry Coating
2
Coating whole
sheet
Spot Gloss
3
Coating only
toner printed area
Foiling
4
Foiling only
toner printed area
Home Screen
Mode select (Change to be gray color which you select)
After
Before
Tiny Slit here
3 side trim is necessary
Feeding one by one
No need to burst
Only on toner printed area
is coated by gloss layer.
Only on toner printed area
is coated by foil
Feature
Cover the film on whole
paper except front side.
Make strong layer on the
paper and protect the
printing image.
Burst by hand and 3 side
trimming is necessory.
Coat by thin layer on
whole paper.
Make shiny and luxury
effect on the paper.
Protect the printing
image.
Make gloss effect only on toner
printed area. Put the gloss coat
maerial and make gloss and
luxury effect on the paper.
No more 130℃, or
film may be melted.
Set up to 130℃
Caution
Put Gold, Silver and other
color foils material only on
toner printed area.
Make luxury effect.
6-1
6-1:Mode Select
℃
ppm
Film Type
Basic Temp.
Basic Speed
Laminate
Film
100～120℃
10PPM
Dry Coat
Ribbon
130～150℃
10PPM
Image Coat
Film
110～130℃
15PPM
Foil
115～135℃
10PPM
Advertisement
