Operation - Husqvarna 590BTS Operator's Manual

8. Tighten the load lifter straps.
Introduction
WARNING:
the safety chapter before you use the
product.
Connectivity
This product is prepared for connectivity and has a
location for installation of a Husqvarna Connectivity
Device. When the Husqvarna connectivity device
is installed, the product has
technology and can use Husqvarna Fleet Services
to connect to mobile devices. This enables more
functions.
Husqvarna Fleet Services
Husqvarna Fleet Services
gives the operator an overview of all products that
are connected. On this product a Husqvarna Fleet
™
Services sensor can be installed. The Husqvarna
™
Fleet Services sensor collects product data and
lets you connect to the Husqvarna Fleet Services
system. The Husqvarna Fleet Services
reports data such as operation time, servicing
intervals and location of the product.
For more information about Husqvarna Fleet
™
Services , download the Husqvarna Fleet
™
Services app or speak to your Husqvarna
representative.
To install the Husqvarna connectivity
device
Do the steps that follow to install the Husqvarna
connectivity device. For more information about
the Husqvarna connectivity device, refer to
www.husqvarna.com.
12

Operation

Read and understand
®
Bluetooth
wireless
™
™
is a cloud solution that
™
system
1. Loosen the 2 screws and remove the plastic
cover.
™
2. Remove the torx screw and open the lid for the
connectivity device.
™
T10
1805 - 004 - 20.11.2023