Page 1
FR Manuel d’utilisation 106-126 LT Naudojimosi instrukcijos 341-361 NL Gebruiksaanwijzing 127-147 LV Lieto‰anas pamÇc¥ba 362-382 Istruzioni per l’uso 148-168 SK Návod na obsluhu 383-403 350BT ES Manual de instrucciones 169-189 HR Priruãnik 404-424 DE Bedienungsanweisung 190-210 Navodila za uporabo 425-445 530BT PT Instruções para o uso 211-231...
KEY TO SYMBOLS Symbols Noise emission to the environment according to the European WARNING! The machine can be a Community’s Directive. The dangerous tool if used incorrectly or machine’s emission is specified in carelessly, which can cause serious the Technical data chapter and on or fatal injury to the operator or the label.
FUEL HANDLING Operator’s manual. Fuel ..............14 Fueling ..............15 Husqvarna AB has a policy of continuous product STARTING AND STOPPING development and therefore reserves the right to modify the design and appearance of products without prior Starting and stopping ........... 16 notice.
The business concept is to develop, manufacture and market motor-driven products for forestry and gardening, as well as for the building and construction industry. Husqvarna ′ s aim is also to be at the front edge for ergonomics, usability, security and environmental protection. That is the reason why we have developed many different features to add to our products within these areas.
WHAT IS WHAT? 12 13 What is what on the blower? Frame 14 Control handle/Operating handle Harness (Hip belt only available with 350BT) 15 Stop switch with throttle position setting Engine cover 16 Throttle trigger Fan shell 17 Elbow Air intake screen...
GENERAL SAFETY PRECAUTIONS General Starting • Never start the machine indoors. Exhaust fumes can IMPORTANT! be dangerous if inhaled. The machine is only designed for blowing lawns, • Observe the surroundings and ensure that no people pathways, asphalt roads and the like. or animals can come into contact with the blower.
Page 7
GENERAL SAFETY PRECAUTIONS Transport and storage A correctly adjusted harness and machine significantly facilitates the work. Adjust the harness to give the best • Store and transport the machine and fuel so that there working position. is no risk of any leakage or fumes coming into contact with sparks or open flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.
SAFETY INSTRUCTIONS Personal protective equipment • Always wear heavy, long pants, boots, gloves, and a long-sleeve shirt. To reduce the risk of injury associated with objects being drawn into rotating WARNING! You must use approved parts, do not wear loose clothing, scarves, jewelry, personal protective equipment whenever etc.
Start the engine and make sure the engine stops when you move the stop switch to the stop setting. 530BT 350BT For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and servicing the machine’s safety...
• Use the machine during normal working hours to avoid unnecessary noise. Avoid working early in the 530BT 350BT morning or late at night. • The muffler on your machine is equipped with a spark arrestor mesh; this must be cleaned regularly. See the WARNING! Be aware of your heading Muffler in the Maintenance chapter.
Page 11
SAFETY INSTRUCTIONS Basic safety rules • Never put the machine down with the engine running unless you have it in clear sight. • Engine exhaust fumes contain carbon monoxide, which can cause carbon monoxide poisoning. For this reason you should not start or run the machine indoors, or anywhere that is poorly ventilated.
Page 12
SAFETY INSTRUCTIONS • Check that the air intake is not blocked, for example, by leaves or rubbish. A clogged air intake reduces the machine’s blowing capacity and increases the engine’s working temperature, which can result in engine failure. Stop the engine and remove the object. •...
Assemble the knob and tighten. • Adjust the position and angle to achieve a comfortable working position, and tighten. 350BT Assemble the intermediate pipe. • Use the clamp to fasten the cabling to the flexible hose.
Mixture 1:50 (2%). • If HUSQVARNA two-stroke oil is not available, you may use another two-stroke oil of good quality that is intended for air cooled engines. Contact your dealer when selecting an oil.
FUEL HANDLING Fueling WARNING! Taking the following precautions, will lessen the risk of fire: Refuel in a well ventilated area. Never fuel the machine indoors. Do not smoke or place hot objects near fuel. Always shut off the engine before refuelling.
Set the required engine speed with the throttle control. 530BT • Idle speed (3) 350BT • About one third open. (2) It is not allowed to set the stop switch in full throttle position. Allow the engine to warm for a few minutes.
Check regularly that the muffler is complete and secured correctly. Tighten the screws. • 350BT 8-12 Nm. (1) WARNING! Never use the blower if the screen is not in place. Before use, check that the screen is in place and undamaged.
If the machine is used in dusty conditions the air filter 0,6-0,7 should be soaked in oil. See instructions under the heading Oiling the air filter. 350BT • Remove the air filter cover and take out the filter. Wash it clean in warm, soapy water. Ensure that the filter is dry before refitting it.
MAINTENANCE Oiling the air filter Always use special filter oil. Filter oil contains a solvent to make it spread evenly through the filter. You should therefore avoid skin contact. Put the filter in a plastic bag and pour the filter oil over it. Knead the plastic bag to distribute the oil.
MAINTENANCE Maintenance schedule Below you will find some general maintenance instructions. If you need further information please contact your service workshop. Daily Weekly Monthly Maintenance maintenance maintenance maintenance Clean the outside of the machine. Check that the throttle control functions safely. Check that the stop switch works correctly.
TECHNICAL DATA Technical data Technical data 530BT 350BT Engine Cylinder displacement, cm 29,5 50,2 Idle speed, rpm 3000 2200 Max. engine output, acc. to ISO 8893, kW/ rpm Catalytic converter muffler Speed-regulated ignition system Ignition system NGK CMR7H/ NGK CMR7H/...
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the blowers Husqvarna 530BT, 350BT with serial numbers dating 2016 and onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE: - of May 17, 2006 ”relating to machinery”...