Electronic Programmer - Smeg SIL68MA8 Manual

7.8 Electronic programmer

7.8.1 Setting the time
On the first use, or after a power failure,
and
decrease the setting by one minute for each pressure.
Press either of the value modification keys to display the current time.
7.8.2 Using the timer
Warning: the timer does not stop the cooking operation. It only warns the user that the preset number of
minutes has passed.
The programmer can also be used as an ordinary timer. Press
; press and hold
released, the countdown will start and
After the timer has been programmed, the display will go back to showing the current time; to display the
remaining time, press
7.8.3 Stopping the buzzer
The buzzer stops automatically after about seven minutes. It can be deactivated manually by pressing
keys and
To switch off the oven, return the knobs to the O setting.
7.8.4 Semi-automatic cooking
Semi-automatic cooking is the function which allows a cooking operation to be started and then ended
after a specific length of time set by the user.
Having selected a function, press and hold
hold and simultaneously use
count of the programmed cooking duration will start and the display will show the current time together
with and A (to indicate that a programmed cooking operation has been set).
18
Instructions for the user
keys together, and at the same time press the
and use
.
together.
LIST OF FUNCTIONS
Timer key
End of cooking key
Cooking duration key
Value decrease key
Value increase key
will be flashing on the appliance's display. Press the
or to set the required number of minutes. When
and will appear on the display.
; the display will show the numbers
or to set the cooking duration. When
or keys: this will increase or
; the display will show the numbers
is released, the
is
; press and