Smeg SDO10-5 Manual page 8

6.4 End of cooking
When cooking is over, the oven will automatically switch off and, at the same time, an intermittent
alarm will sound. After switching off the alarm, the display will once again show the right time together
with the symbol
6.5 Adjusting the buzzer volume
The buzzer volume can be varied (3 settings) while it is operating by pressing key
6.6 Stopping the buzzer
The buzzer stops automatically after seven minutes. It can be stopped manually by pressing keys
and together.
6.7 Timer
The programmer can also be used as an ordinary timer. By pressing key
; keep the key pressed and at the same time press keys
programmed counting will begin and the display will show the current time and the symbol
After set-up, to see the remaining time, press the key
Use as a minute counter does not interrupt functioning of the oven at the end of the programmed time.
6.8 Deleting the set data
With the program set, hold down the key of the function to be deleted, while at the same time going to
the value
deletion of the duration as the end of cooking.
6.9 Modifying the set data
The cooking data entered can be changed at any time by keeping the function key pressed and at the
same time adjusting the keys
10
Instructions for the user
, indicating that the oven has returned to manual operation mode.
by pressing the value modification keys
or .
or . On releasing the key
.
or . The programmer will interpret
.
, the display shows
,
.