Smeg SCT109-8 Manual page 38

Instructions for the user
8.6 Cleaning self-cleaning panels (catalysis cycle)
If the self-cleaning panels are dirty, primarily with small amounts of grease, a
heating cycle can be executed to regenerate them.
Clean the base and the roof liner first with a microfibre cloth soaked in water and
neutral washing up liquid, then rinse thoroughly.
Set a regeneration cycle by selecting a fan function at the maximum
temperature for one hour. (see "6.7 Selecting a cooking function").
If the panels are particularly dirty, after the regeneration cycle, remove them
and wash them with neutral washing up liquid. Then rinse and dry them.
Put the panels back in the oven and set a fan function at a temperature of 180°C
for one hour, in order to ensure that they are thoroughly dry.
You are advised to carry out the self-cleaning panel regeneration cycle every 15
days.
The panel regeneration cycle is a cleaning method suitable for grease residues,
not sugar-based ones.
94