Extraordinary Maintenance - Smeg SC45VK Instructions For Use Manual

EN

14 EXTRAORDINARY MAINTENANCE

Occasionally, the oven will require minor servicing procedures or the
replacement of parts subject to wear and tear, such as gaskets, light bulbs,
etc. The specific operations for each procedure of this kind are provided below.
Before carrying out any operation involving access to live parts, disconnect the
appliance from the electricity supply.
14.1 What should I do if the oven doesn't work?
WARNING! Any type of repair must only be done by a specialised
technician. Any repair done by a person not authorised by the
manufacturer is dangerous.
You do not need to contact Technical Assistance to resolve the following
questions.
Failure description
The display
showing!
Nothing happens when
I press the keys!
The oven does not
work!
When the
operating I can hear
some strange noises!
The food doesn't heat
up or
slowly!
The message "Err_"
appears in the display
The appliance
makes a noise after
the cooking process is
finished!
The oven switches on
but the interior light
does not go on!
Display shows
30
Instructions for the User
is not - The time indication has been switched off (see
section on Operating Settings).
- The Safety Block is active (see section on
Child Safety Lock-out function).
- Check if the plug is correctly fitted in the
socket.
- Check if the oven power is switched on.
oven is - It has to do with the operating noises that can
occur during the cooking process, e.g, by the
water pumps in the steam generator.
- The steam inside the cavity produces a
pressure build-up and sometimes the cavity
walls may produce noise when they react to the
pressure.
- These noises are normal, there is no problem.
- You have selected the correct operating times
heats very and temperature setting.
- The food you have put inside the oven is a
larger amount or colder than you usually put in.
- Please contact the Customer Care.
still This is not a problem. The cooling fan keeps on
working for some time. When the temperature
has dropped sufficiently, the fan will switch itself
off.
If all the functions work properly it is probable
that the lamp has blown. You can keep on using
the oven.
Perform water level calibration (see 8.3.2)
Solution