Smeg PL8210X-1 Instruction Manual page 16

User instructions
DELAYING THE PROGRAM
(available in all programs except the soak program)
The PROGRAM DELAY button (7) can be pressed to delay the start of
the washing program by 3, 6 or 9 hours. This function allows you to set
the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the "program delay" set
previously will come into effect (light (8) indicating the time left before the
start of the program and light (4) indicating the program set flash).
If you wish to reset or change the delay once the program has started,
proceed as follows:
•
press the START/PAUSE button (2) for a few seconds, until the
PROGRAM DELAY light (8) and the light (4) of the program set stop
flashing and remain constantly on;
•
press the PROGRAM DELAY button (7) to change or annul the
delay set (lights 3, 6 and 9 off);
•
press the START/PAUSE button (2) to start the program. If a delay
has been set, the PROGRAM DELAY light (8) and the light (4) of
the set program start to flash; if the program delay has been
annulled, only the program light (4) will flash to indicate the start of
the program.