Smeg PL8210X-1 Instruction Manual page 14

User instructions
STARTING THE PROGRAM
To start the dishwasher, press the START/PAUSE button (2) for a few
seconds, until the light of the selected program starts to flash
(confirmation beep).
The light will flash as long as the program is in progress, to indicate that
it is being performed.
END OF PROGRAM
At the end of the program the beeper
sounds briefly and the program lights 4
and 5 (marked "end") flash.
INTERRUPTION A PROGRAM
To interrupt a program in progress:
•
press the START/PAUSE button (2); the light of the program in
progress remains on (confirmation beep);
•
you may now restart the program by pressing button (2) again until it
restarts, or change or annul the program (see "C
", or "A
PROGRAM
CHANGING A PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see "I
•
select the new program;
•
start the program (see "S
NNULLING A PROGRAM
TARTING THE PROGRAM
").
NTERRUPTION A PROGRAM
").
HANGING A
");