Rear Panel - Samsung DSR 9500AT Instructions For Use Manual

Rear Panel

6 11
1. AC MAINS
2. LNB
3. LOOP
4. RS 232 DATA PORT
5. S-VHS
6. SPDIF
7. AV SCARTS
8. 0/12V
9. VIDEO, AUDIO R/L
10. ANT.IN
11. TV
L I T E R E
10 7 5
This is to plug in the AC mains power cord.
The input AC voltage range is 100V to 240V, 50Hz/60Hz supply.
This port is to connect the coaxial cable from LNB of your dish.
The IF input is provided through this port and the input frequency
range is 950-2150 MHz. Also the voltage switching 13V and
18V is passed through this port.
To enable the connection of an Analog receiver,
The receiver is provided with this 'LOOP' port.
This is for connecting your receiver to a computer for reading
and loading data information.
This is for connecting STB to your TV by using S-VHS cable.
Output for connection to a digital amplifier.
This is for connecting to your AV scarts for TV & VCR or
DVD player.
This is for connecting to an external LNB switch.
These RCA connectors are for connecting any external video
and audio.
This is for connecting your local RF channels to your TV
through Loop.
This is for connecting to your TV via RF cable.
C E I V E R
DESCRIPTION
8
9 4 3
GB-7
2 1