Jabra Evolve 65e MS How Do

Jabra Evolve 65e MS
How do I pair my Jabra Evolve 65e with my mobile device?
To pair your Jabra Evolve 65e with your smartphone, tablet, or other
handheld mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off your Jabra Evolve 65e by pressing and holding (3 seconds)
the Multi-function button until the LED flashes red and the neckband
vibrates.
3. To enter pairing mode, press and hold (3 seconds) the Multi-function
button until the LED flashes blue. If you are wearing the earbuds, you
will hear the pairing instructions.
Your earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Evolve 65e from the list of available devices.
Enter "0000" (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips,
Optionally, try using the
https://www.jabra.com/en-au/supportpages/jabra-evolve-65e/6599-623-
109/faq/1020b03f-121a-431b-b00b-9b0240224fd0
Bluetooth Pairing Guide
03/05/2024 18:43
see here.
which provides detailed
Page 1 of 2