Table of Contents
Advertisement
13.4 Opening the door
Press on the edge of the door.
1.
Open the door.
2.
13.5 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 31
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 37
¡ The drum is empty.
Open the door. → Page 39
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.6 Starting the programme
Note: If the intelligent dosing system
is activated, make sure that the dis-
pensers have been filled → Page 41
and the basic dosage has been set
→ Page 42.
Requirement: A programme is set.
→ Page 38
Press
.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: "Finished" .
13.7 Soaking laundry
To soak the laundry, activate the
soaking before the programme start.
Note: If the intelligent dosing system
is activated, the detergent will be dis-
pensed automatically for the soaking
cycle and the main wash.
If the intelligent dosing system is de-
activated, place the detergent directly
in the drum for the soaking cycle and
into the manual dosing compartment
for the main wash.
→ "Detergent drawer", Page 20
Requirements
¡ The laundry is placed in the appli-
ance. → Page 39
¡ A programme is set. → Page 38
Press
Soak until the display
1.
shows the required soaking time.
→ "Buttons", Page 28
Start the programme. → Page 39
2.
Basic operation en
39
Advertisement
Table of Contents
