Chapter 1. Introduction; Features - Lenovo ThinkSystem SD535 V3 System Configuration Manual

Hide thumbs Also See for ThinkSystem SD535 V3:
Table of Contents

Advertisement

Chapter 1. Introduction

Lenovo ThinkSystem SD535 V3 (Types 7DD1 and 7DD8) is a dense and economical node in a 1U rack form
factor. Combining the efficiency and density of blades with the value and simplicity of rack-based servers,
SD535 V3 delivers a cost-efficient scale-out platform that is thermally designed to deliver maximum
performance in the smallest footprint. The system consists of a 2U D3 Chassis (Types 7DD0 and 7DD7)
containing up to four SD535 V3 nodes, all with front access. Each node incorporates a 4th generation EPYC
processor family of AMD. SD535 V3 is well suited for workloads ranging from cloud, analytics to AI and high-
performance computing application like Computer Aided Engineering (CAE) or Electronic Design Automation
(EDA).

Features

Performance, ease of use, reliability, and expansion capabilities were key considerations in the design of
your system. These design features make it possible for the user to customize the system hardware to meet
the needs today and provide flexible expansion capabilities for the future.
Chassis feature
• Redundant optional power capabilities
The chassis supports up to three 1300-watt, 1600-watt, or 2700-watt hot-swap CRPS AC power supplies,
which provide redundancy.
Important: Power supplies and redundant power supplies in the chassis must be of the same brand,
power rating, wattage, or efficiency level, with the same latch color.
• Chassis management
The chassis midplane with PSoC (Programmable System on Chip) allows monitor and management of
nodes and power supply units in the chassis. A chassis caretaker node is selected by the PSoC
firmware for chassis management.
For the management interface, see
functions can only be performed by the caretaker node, whereas other functions can be performed by all
nodes.
Function
– Supported: ✔
– Unsupported: X
PSoC firmware update
1.
By default, the caretaker node is automatically selected by the PSoC firmware on the chassis midplane. To change
the chassis caretaker preference, see https://pubs.lenovo.com/xcc2/NN1ia_c_d3_chassis.
© Copyright Lenovo 2024
https://pubs.lenovo.com/lxcc-overview/
Caretaker node
1
. In XCC, certain management
Other nodes
X
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7dd17dd8

Table of Contents