Table of Contents
Advertisement
18.2 Cleaning the cooking compartment
after using the cleaning aid
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
After using the cleaning assistance, wipe the cook-
▶
ing compartment and allow it to dry completely.
Allow the appliance to cool down.
1.
2.
Wipe out the remaining water in the cooking com-
partment using an absorbent sponge cloth.
Drying
19 Drying
To prevent residual moisture, dry the cooking compart-
ment after using the cleaning aid.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
▶
cooking compartment floor.
Wipe away any water on the cooking compartment
▶
floor before operation.
19.1 Drying the cooking compartment
You can leave the cooking compartment to dry or use
the drying function.
Allow the appliance to cool down.
1.
Remove any dirt from the cooking compartment.
2.
Wipe away any water in the cooking compartment.
3.
Dry the cooking compartment.
4.
To dry the cooking compartment, leave the appli-
‒
ance door open for 1 hour.
Appliance door
20 Appliance door
To clean the appliance door thoroughly, you can disas-
semble the appliance door.
Note:
Further information:
20.1 Detaching the appliance door
Note: The door handles are different depending on the
appliance type.
Open the appliance door fully
1.
→ "Removing the door panes", Page 24.
Open the locking levers on the left- and right-hand
2.
hinges.
Clean the smooth enamel surfaces in the cooking
3.
compartment with a dish cloth or a soft brush. Re-
move stubborn food remnants using a stainless
steel scouring pad.
4.
Remove limescale with a cloth soaked in vinegar,
and wipe this away with clean water.
Dry the cooking compartment with a soft cloth.
5.
6.
To dry the cooking compartment completely, leave
the appliance door open for approx. 1 hour or use
the drying function.
→ "Setting the drying process", Page 23
To use the drying function, set "Drying function".
‒
→ "Setting the drying process", Page 23
Setting the drying process
Requirement: → "Drying the cooking compartment",
Page 23
Press "Cleaning" in the menu.
1.
Press
"Drying function".
2.
The duration cannot be changed.
Press
.
3.
a A notification stating that you should carry out the
necessary preparatory work for the drying appears
on the display.
Confirm the message.
4.
a The drying process starts and the duration counts
down.
a Once the drying has ended, a signal tone sounds. A
message appears on the display confirming that the
operation has finished.
Press
to switch the appliance off.
5.
To dry the cooking compartment completely, leave
6.
the appliance door open for 1 to 2 minutes.
Drying en
23
Advertisement
Table of Contents
