Specifications Operating Data - Culligan Automatic Water Softeners Operating Instructions Manual

H -F
I LO
®
F A
ULLY UTOMATIC
S
PECIFICATIONS AND
Single Exchange Capacity
Tank @ Salt Dosage
Minimum Maximum Flow
gr @ lb
Model g @ kg
HC-150 100,000/30 150,000/75
6,480/14
HC-210 140,000/42 210,000/105
9,070/19
HC-300 200,000/60 300,000/150
12,960/27
HC-450 300,000/90 450,000/225 100
19,440/41 29,160/102
1 Exchange capacities based on treating water containing 10 grains per gallon (171 mg/L) of hardness (expressed as calcium carbonate), free of color, oil, turbidity
and at a service flow rates not exceeding 20 gpm per square foot (49 m
characteristics, temperature, pressure and other factors.
2 Operation of a softener at peak flow rate for extended periods of time may result in a slight reduction of softening capacity. This is due to premature hardness
breakthrough.
NOTE: Operational, maintenance and replacement requirements are essential for this product to perform as advertised.
Specifications are shown for single models. Duplex models have two softener tanks and one brine tank system.
3
W S
ATER
O
PERATING
1
Service Flow Rates
Peak
Press.
Drop
gr @ lb gpm psi
g @ kg m 3 /hr kPa
78 25
9,720/34 17.7 172
76 25
13,600/48 17.2 172
85 25
19,400/68 19.3 172
25
22.7 172
OFTENERS
D
ATA
2
Continuous
Press. Pipe Resin
Flow Drop Size Qty.
gpm psi in
m 3 /hr kPa in
60 15 2
13.6 103 2
58 15 2
13.2 103 2
65 15 2
14.7 103 2
75 15 2
17.0 103 2
3 /m 2 /min) of bed area. These are nominal capacities and will vary with influent water
Softener Brine
Tank Tank
Size Size
3
ft in in
L mm mm
5 21 x 54 24 x 48
142 530 x 1,370 610 x 1,200
7 21 x 69 24 x 48
198 530 x 1,750 610 x 1,200
10 24 x 72 30 x 48
284 410 x 1,830 760 x 1,200
15 30 x 72 30 x 48
426 760 x 1,830 760 x 1,200
Commercial Systems
©2000 Culligan
1-800-CULLIGAN
www.culligan.com
Printed in USA 4/00
DCO 992587
SL-0074
Moore Part No. 46944
Approx.
Ship.
Weight
lb
kg
540
460
640
290
865
395
1,250
570