Configure The Computer's Tcp/Ip Settings - TRENDnet TEW-435BRM Quick Installation Manual

54mbps 802.11g adsl modem router

Hide thumbs Also See for TEW-435BRM:

3. Configure the computer's TCP/IP Settings

To verify that your computer can communicate with your ADSL Modem Router,

you need to configure the TCP/IP settings in your Operating System (OS).

Setup for Windows OS computers is shown below. If you are running any other

OS please see your system documentation for configuration information.

NOTE:

Configure the Computer's TCP/IP Settings apply for both wired

and wireless computers.

Windows 95/98/98SE/ME

Find the

Start

Button located on the Desktop.

Click

Start,

click

Settings,

then click on

Control Panel.

Double-Click the

Network

icon, and the Network Properties box will appear.

Under the General Configuration Tab, locate and select

TCP/IP

with the

corresponding network card (such as TRENDnet TE100-PCIWN

10/100Mbps Network Adapter), then click on the

Properties

button. The

TCP/IP window will appear.

NOTE:

If you have a Fixed IP address connection, write down the

existing IP addresses from the following sections before you modify

them.

Under the IP Address Tab, click on

Obtain an IP address automatically.

English

Table of Contents