Configure The Tcp/Ip Settings Of Your Pc - TRENDnet TPL-111BR User Manual

2.2 Configure the TCP/IP Settings of your PC

Before you begin
Make sure that you get setup information you need from your Internet Service Provider (ISP).
To set up Windows 2000
1. Right-click on My Network Places icon on the desktop and then click Properties in menu.
2. Double-click Local Area Connection icon
3. Select Internet Protocol (TCP/IP) and click Properties button.
There are two ways to assign an IP address. You can either obtain an IP address automatically or
specify an IP address.
If you want to obtain an IP address automatically
4. Check the radio button for Obtain an IP address automatically.
5. Then you have to assign Domain Name System (DNS) server's IP address. Two methods
are available: automatically obtain an IP address or manually specify an IP address for DNS
server. If you can obtain DNS server address automatically, check the radio button for
Obtain DNS server address automatically and proceed to step 10. Or if you can
configure a DNS server address, then proceed to step 9.
If you want to specify an IP address manually
Contact your network administrator first to obtain a valid IP address for you to use. This IP
address must be a unique address in the range of addresses that are available for your network.
6. Check the radio button for Specify an IP address. In the IP address box, type the assigned
IP address. The default IP is 10.0.0.XXX.[any one besides 10.0.0.2].
7. In the Subnet mask box, type the subnet mask of your network. The default is
255.255.255.0.
8. In the Default gateway box, set the gateway address. The default is 10.0.0.2
9. Check the radio button for Use the following DNS server addresses. In the Preferred
DNS server and Alternate DNS server boxes, input the IP addresses of DNS Server
provided by your ISP.
10. Click OK button in the TCP/IP Properties window to complete the PC configuration, and
click Close or the OK button to close the Network window.
11. To link your PC together with TPL-111BR by plugging an Ethernet cable or making a
Wireless connection.
and then click Properties button.
2