Temperature Selector - Smeg FC326PNF Instructions For Use Manual

Refrigerator/freezer Refrigerator/freezer
selector selector
ON/OFF button and ON/OFF button and

temperature selector

temperature selector
Use the rotating switch A to select the appliance section whose
temperature you wish to see on the display, and whose
temperature you may set by using the knob E.
ON/OFF button
Use the knob A to select the freezer, and switch the appliance on
with a 3-second long press of the knob E. Both the refrigerator
and the freezer are switched on, and the operation mode is
indicated by the lit green light. Subsequent 3-second long press
of the same button switches the entire appliance off.
Refrigerator switch on/off
Model fi tted with temperature display enables the fridge to be
switched off while the freezer keeps operating. Use the rotating
switch A to select the refrigerator, and press the knob E for 3
seconds to switch the refrigerator off. Subsequent 3-second long
press of the same button switches the refrigerator back on.
Temperature selection
Use rotating knob A to select refrigerator or freezer, and press
knob E to set the desired temperature. Setting is changed in
circular sense from the position Max. to Min. (up to intensive
freezing in case of freezer). After 5 seconds the temperature
setting is automatically saved, and the display indicates current
temperature in the selected section of the appliance.
Intensive freezing
Use the rotating switch to select the freezer. By short consecutive
pressing of the knob E select the intensive freezing option (SF)
and wait for 5 seconds for the setting to be saved. Orange light
(F) is lit. If the setting is not switched off manually, it will be
switched off automatically after approximately two days.
Use this option with the fi rst start of the appliance, before
cleaning, and prior inserting large quantities of fresh food into
the freezer.
13