Installation And Connection - Smeg FC326PNF Instructions For Use Manual

Installation and connection

Selecting the location Selecting the location
Positioning the Positioning the
appliance appliance
• Place the appliance in dry and well aired room. The appliance
operates best at temperature ranges indicated in the chart
below. Relevant class of the appliance is indicated on the
rating plate.
Class
SN (subnormal)
N (normal)
ST (subtropical)
T (tropical)
Positioning the appliance requires two persons in order to avoid
injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base. The
appliance is fi tted with adjustable feet on the front side, used
to level the appliance. Rear side of the appliance is fi tted with
wheels (certain models only) facilitating the positioning of the
appliance at the preselected place.
• The element above the appliance must be at least 5 cm away
to allow suffi cient cooling of the condenser.
• Avoid exposing the appliance to direct sunlight or heat
sources. If this is not possible, install insulation plate between
the appliance and adjacent heat source.
• Bottom front corners of the appliance is fi tted with handles to
facilitate moving (certain models only). The appliance may
stand independently or adjacent to a furniture element or wall.
Be sure to leave enough space for the opening of the door, to
avoid damage to the appliance or personal injury. Also leave
ample space for extracting shelves (see installation diagram).
Ambient temperature
from +10°C to +32°C
from +16°C to +32°C
from +16°C to +38°C
from +16°C to +43°C
7